Abstract:Controlled polymerization is of great significance for the tailoring of macromolecular structure and synthesis of polymers with excellent properties. Several non-toxic organic guanidinines were prepared/selected in our laboratory in recent years and used as the catalysts/initiators to realize controlled melt polycondensation (MP), ring-opening polymerization (ROP), and depolymerization (DEP). Isotactic melt polycondensation (Iso-MP) of L-lactic acid/D-lactic acid (LLa/DLa) was carried out for the first time with biogenic creatinine (CR) catalyst and poly(L-lactic acid)/poly(D-lactic acid) (PLLA/PDLA) with high isotacticity (Iso. > 98%) was obtained; Combined MP with solid-state polycondensation (MP-SSP) of the medium molecular weight PLLA/PDLA (M-W = 2.2 x 10(4) Iso. = 98.2%), prepared by the Iso-MP with CR, was carried out, and high molecular weight PLLA/PDLA (M-W > 1.0 x 10(5)) with high isotacticity (Iso. > 98%) was obtained. The initial decomposition temperature (T-d,T-i) of the synthesized PLLA reached up to 324.5 degrees C, which was 120 degrees C higher than that of PLLA synthesized by SnCl2 center dot 2H(2)O catalyst; Optical pure (e.e. 100%) L-lactide/D-lactide (OP-LLA/OP-DLA) were synthesized via Iso-MP and the subsequent depolymerization (DEP) of LMW-PLLA/LMW-PDLA (M-W = 8.0 x 10(2)- 9.0 x 10(2)) with CR catalyst. The polymer residues (r-PLLA/r-PDLA), produced accompanying with the lactides formation, were reused as the raw material for LLA/DLA synthesis after being hydrolyzed. The total yield of OP-LLA/OP-DLA reached up to 98%; Several sterically hindered guanidine carboxylates (HBG.OAc, CRA, CRG, CRL, TBDA) were synthesized and used to realize living ROP of LLA. An optical pure morpholine-2,5-dione (3S,6S-BMMD), derived from LLa and L-serine, was synthesized. Living ROP of 3S,6S-BMMD was carried out with CRA catalyst for the first time. After debenzylation of the synthesized P(3S,6S-BMMD), an amphiphillic copolymer P(LLa-co-Ser) was obtained, which is a useful support material in biomedical areas. The fine molecular structures and isotacticities of growing polymeric species were characterized by in situ monitoring with H-1-NMR, C-13-NMR. And the mechanisms of the above mentioned controlled polymerizations were proposed.

Controlled Synthesis of L-Lactide Using Sn-Beta Zeolite Catalysts in a One-Step Route

Melt Polycondensation of L‐lactic Acid Catalyzed by 1,3‐dialkylimidazolium Ionic Liquids

Design of a Heterogeneous Catalytic Process for the Continuous and Direct Synthesis of Lactide from Lactic Acid

Direct Synthesis of Lactide from Concentrated Lactic Acid Catalyzed by Hierarchical Sn-beta Zeolite

Efficient Synthesis of Lactide with Low Racemization Catalyzed by Sodium Bicarbonate and Zinc Lactate

Direct Synthesis of Lactide from Lactic Acid by Sn-beta Zeolite: Crucial Role of the Open Sn Site

Study on zinc oxide‐creatinine hybrid catalyst for efficient lactide synthesis with low racemization

Synthesis of L-Lactide from Lactic Acid and Production of PLA Pellets: Full-Cycle Laboratory-Scale Technology

Poly(lactic acid) Synthesized from Non‐food Biomass Feedstocks with Tin‐loaded ZA Molecular Sieves Catalysts by Direct Melt Polycondensation

Synthesis of Poly(Lactic Acid) from Ammonium Lactate Fermentation Broth of Food Waste

Reducing Meso -lactide formation from racemic lactic acid using shape-selective H-Beta zeolite

Lactide synthesis via thermal catalytic depolymerization of poly lactic acid oligomer using ZnO nanoparticle dispersion

Green Synthesis of Enantiomerically Pure L-Lactide and D-Lactide Using Biogenic Creatinine Catalyst

Ring-opening Polymerization of L-Lactide Catalyzed by a Novel Molybdenum-Based Catalytic System

Controlled Synthesis of PLA-series Environment-friendly Polymers with Guanidine Catalysts

Preparation of L-Lactide with High Optical Purity Via the Zinc-Doped Polypyrrole-Catalyzed Lactic Acid Condensation

A Strategy of In Situ Catalysis and Nucleation of Biocompatible Zinc Salts of Amino Acids towards Poly(l-lactide) with Enhanced Crystallization Rate

Synthesis of star poly (L-lactic acid) and its copolymers catalyzed by lipase in supercritical carbon dioxide

A response surface methodology for the use of MIL‐101 as a catalyst for the one‐step synthesis of lactide

Ring‐opening polymerization of lactide catalyzed using metal‐coordinated enzyme‐like amino acid assemblies

Stereoretention in the Bulk ROP of l-Lactide Guided by a Thermally Stable Organocatalyst