Abstract:Controlled polymerization is of great significance for the tailoring of macromolecular structure and synthesis of polymers with excellent properties. Several non-toxic organic guanidinines were prepared/selected in our laboratory in recent years and used as the catalysts/initiators to realize controlled melt polycondensation (MP), ring-opening polymerization (ROP), and depolymerization (DEP). Isotactic melt polycondensation (Iso-MP) of L-lactic acid/D-lactic acid (LLa/DLa) was carried out for the first time with biogenic creatinine (CR) catalyst and poly(L-lactic acid)/poly(D-lactic acid) (PLLA/PDLA) with high isotacticity (Iso. > 98%) was obtained; Combined MP with solid-state polycondensation (MP-SSP) of the medium molecular weight PLLA/PDLA (M-W = 2.2 x 10(4) Iso. = 98.2%), prepared by the Iso-MP with CR, was carried out, and high molecular weight PLLA/PDLA (M-W > 1.0 x 10(5)) with high isotacticity (Iso. > 98%) was obtained. The initial decomposition temperature (T-d,T-i) of the synthesized PLLA reached up to 324.5 degrees C, which was 120 degrees C higher than that of PLLA synthesized by SnCl2 center dot 2H(2)O catalyst; Optical pure (e.e. 100%) L-lactide/D-lactide (OP-LLA/OP-DLA) were synthesized via Iso-MP and the subsequent depolymerization (DEP) of LMW-PLLA/LMW-PDLA (M-W = 8.0 x 10(2)- 9.0 x 10(2)) with CR catalyst. The polymer residues (r-PLLA/r-PDLA), produced accompanying with the lactides formation, were reused as the raw material for LLA/DLA synthesis after being hydrolyzed. The total yield of OP-LLA/OP-DLA reached up to 98%; Several sterically hindered guanidine carboxylates (HBG.OAc, CRA, CRG, CRL, TBDA) were synthesized and used to realize living ROP of LLA. An optical pure morpholine-2,5-dione (3S,6S-BMMD), derived from LLa and L-serine, was synthesized. Living ROP of 3S,6S-BMMD was carried out with CRA catalyst for the first time. After debenzylation of the synthesized P(3S,6S-BMMD), an amphiphillic copolymer P(LLa-co-Ser) was obtained, which is a useful support material in biomedical areas. The fine molecular structures and isotacticities of growing polymeric species were characterized by in situ monitoring with H-1-NMR, C-13-NMR. And the mechanisms of the above mentioned controlled polymerizations were proposed.

Synthesis of Polylactide with Low-toxic Zinc Catalysts

Melt Polycondensation of L‐lactic Acid Catalyzed by 1,3‐dialkylimidazolium Ionic Liquids

Synthesis of Cyclic and Linear Block Copolyesters via Ring-opening Copolymerization of epsilon-Caprolatone and L-Lactide Catalyzed by Zinc Complex

Construction of Polylactide-block-Polystyrene Copolymer by Orthogonal ROP and O-ATRP via Bifunctional beta-Diiminate Zinc Catalyst

Preparation of L-Lactide with High Optical Purity Via the Zinc-Doped Polypyrrole-Catalyzed Lactic Acid Condensation

Ring-opening Polymerization of L-Lactide Catalyzed by a Novel Molybdenum-Based Catalytic System

Lactide synthesis via thermal catalytic depolymerization of poly lactic acid oligomer using ZnO nanoparticle dispersion

A Highly Active Zinc-Based Catalyst System for Lactide Homo- and Copolymerization under Industrially Relevant Conditions

Study on zinc oxide‐creatinine hybrid catalyst for efficient lactide synthesis with low racemization

Efficient Synthesis of Lactide with Low Racemization Catalyzed by Sodium Bicarbonate and Zinc Lactate

Morphology and melt crystallization of poly(L-lactide) obtained by ring opening polymerization of L-lactide with zinc catalyst

Enhancing catalytic activity via metal tuning of zeolitic imidazole frameworks for ring opening polymerization of l-lactide

Synthesis of Poly(Lactic Acid-co-Glycolic Acid) Copolymers with High Glycolide Ratio by Ring-Opening Polymerisation

Controlled Synthesis of PLA-series Environment-friendly Polymers with Guanidine Catalysts

A Strategy of In Situ Catalysis and Nucleation of Biocompatible Zinc Salts of Amino Acids towards Poly(l-lactide) with Enhanced Crystallization Rate

Synthesis of High Molecular Weight Poly(L-Lactic Acid) and Poly(D-Lactic Acid) with Improved Thermal Stability Via Melt/Solid Polycondensation Catalyzed by Biogenic Creatinine

Synthesis process of high-performance and high-molecular-weight poly-L-lactic acid

Bio-based Phenol Catalyst for Poly(L-lactic acid) with Ultrahigh Polymerization Activity and Controllable Crystallinity

Ring-Opening Homopolymerization of Lactides

Optimization of controlled ring-opening polymerization of l-lactide to hydroxyl terminated polylactides using zinc acetate catalyst

Polyaniline-Supported Zinc Oxide Nanocomposite-Catalyzed Condensation of Lactic Acid to Lactide with High Yield and Optical Purity