Abstract:The application of Li-ion conducting garnet electrolytes is challenged by their large interfacial resistance with the metallic lithium anode and the relative small critical current density at which the lithium dendrites short-circuit the battery. Both of these challenges are closely related to the morphology and the structure of the garnet membranes. Here, we prepared four polycrystalline garnet Li6.4La3Zr1.4Ta0.6O12 (LLZTO) pellets with different particle sizes (nano/micro) and grain boundary additive (with/without Al2O3) to investigate the influence of grain size, the composition of the grain boundary, and the mechanical strength of the pellet on the total Li-ion conduction of the pellet, Li/garnet interfacial transfer, and lithium dendrite growth in all-solid-state Li-metal cells. The results showed that the garnet pellets prepared with nanoparticles and LiAlO2-related grain boundary phase had decreased total Li-ion conductivity because of the increased resistance of the grain boundary; however, these pellets showed higher mechanical strength and improved capability to suppress lithium dendrite growth at high current densities. By controlling the grain size and optimizing the grain boundary with Al2O3 sintering additive, the hot-pressing sintered LLZTO solid electrolytes can reach up to 1.01 × 10–3 S cm–1 in Li+ conductivity and 0.29 eV in activation energy. LLZTO with nanosized grain and LiAlO2-modified grain boundary showed the highest critical current density, which is 0.6 mA cm–2 at room temperature and 1.7 mA cm–2 at 60 °C. This study offers a useful guideline for preparing a high-performance LLZTO solid electrolyte.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18674?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18674</a>.Feature sizes of LLZTO powders prepared by hand milling and sand milling (Table S1); XRD patterns of hot-pressing sintered samples (Figure S1); element distribution on the polished surface of the sintered samples containing Al2O3 and without Al2O3 by EDX scan (Figure S2); equivalent circuit model for EIS fitting (Figure S3); and LLZTO specimens fractured by three-point bending test, gold sprayed on the surface of the micro-solid electrolyte, an optical photo of the micro-lithium symmetrical battery, and a micro-test fixture designed to test the micro-battery (Figure S4) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18674/suppl_file/am0c18674_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation of transparent LLZTO electrolyte and its application in the observation of Li dendrite

In-situ optical observation of Li growth in garnet-type solid state electrolyte

Microscopic Origin of the Ionic Transport Behaviors in Solid Electrolytes for Li Batteries

Perspectives on Li Dendrite Penetration in Li<sub>7</sub>La<sub>3</sub>Zr<sub>2</sub>O<sub>12</sub>-Based Solid-State Electrolytes and Batteries: Materials, Interfaces, and Charge Transfer

Perspectives on Li Dendrite Penetration in Li7La3Zr2O12‐Based Solid‐State Electrolytes and Batteries: Materials, Interfaces, and Charge Transfer

Enhanced Performance of Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 Solid Electrolyte by the Regulation of Grain and Grain Boundary Phases

Direct Observation of Lithium Dendrites Inside Garnet-Type Lithium-Ion Solid Electrolyte

Enhanced Critical Current Density in the Garnet Oxide Electrolyte by a Silver Interlayer

Enhanced Performance of Li6.4La3Zr1.4Ta0.6O12 Solid Electrolyte by the Regulation of Grain and Grain Boundary Phases.

Amorphous Phase Induced Lithium Dendrite Suppression in Glass-Ceramic Garnet-Type Solid Electrolytes

Lithium Dendrite Propagation in Ta-Doped Li 7 La 3 Zr 2 O 12 (LLZTO): Comparison of Reactively Sintered Pyrochlore-to-Garnet vs LLZTO by Solid-State Reaction and Conventional Sintering

Quasi- In Situ XPS Insights into the Surface Chemistry of Garnet-Type Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 Solid-State Electrolytes: The Overlooked Impact of Pretreatments and a Direct Observation of the Formation of LiOH

In-situ construction of multifunctional interlayer enabled dendrite-free garnet-based solid-state batteries

In Situ Fabrication of High Ionic and Electronic Conductivity Interlayers Enabling Long-Life Garnet-Based Solid-State Lithium Batteries

Investigation of in-situ lithium dendrite growth in the garnet type electrolyte Li7-xLa3Zr2-xTaxO12 (LLZTO) under an applied DC voltage

Crystal Structure and Preparation of Li7La3Zr2O12 (LLZO) Solid-State Electrolyte and Doping Impacts on the Conductivity: An Overview

Atomic-Scale Engineering of Grain Boundary Chemistry and Potential for Li-Garnet Solid-State Electrolytes

Probing into the origin of an electronic conductivity surge in a garnet solid-state electrolyte

High-throughput dynamic modeling of Li migration behaviors in garnet electrolyte

Grain Boundary Characterization and Potential Percolation of the Solid Electrolyte LLZO

Optimizing Li Ion Transport in a Garnet-Type Solid Electrolyte via a Grain Boundary Design