Abstract:The application of Li-ion conducting garnet electrolytes is challenged by their large interfacial resistance with the metallic lithium anode and the relative small critical current density at which the lithium dendrites short-circuit the battery. Both of these challenges are closely related to the morphology and the structure of the garnet membranes. Here, we prepared four polycrystalline garnet Li6.4La3Zr1.4Ta0.6O12 (LLZTO) pellets with different particle sizes (nano/micro) and grain boundary additive (with/without Al2O3) to investigate the influence of grain size, the composition of the grain boundary, and the mechanical strength of the pellet on the total Li-ion conduction of the pellet, Li/garnet interfacial transfer, and lithium dendrite growth in all-solid-state Li-metal cells. The results showed that the garnet pellets prepared with nanoparticles and LiAlO2-related grain boundary phase had decreased total Li-ion conductivity because of the increased resistance of the grain boundary; however, these pellets showed higher mechanical strength and improved capability to suppress lithium dendrite growth at high current densities. By controlling the grain size and optimizing the grain boundary with Al2O3 sintering additive, the hot-pressing sintered LLZTO solid electrolytes can reach up to 1.01 × 10–3 S cm–1 in Li+ conductivity and 0.29 eV in activation energy. LLZTO with nanosized grain and LiAlO2-modified grain boundary showed the highest critical current density, which is 0.6 mA cm–2 at room temperature and 1.7 mA cm–2 at 60 °C. This study offers a useful guideline for preparing a high-performance LLZTO solid electrolyte.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18674?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18674</a>.Feature sizes of LLZTO powders prepared by hand milling and sand milling (Table S1); XRD patterns of hot-pressing sintered samples (Figure S1); element distribution on the polished surface of the sintered samples containing Al2O3 and without Al2O3 by EDX scan (Figure S2); equivalent circuit model for EIS fitting (Figure S3); and LLZTO specimens fractured by three-point bending test, gold sprayed on the surface of the micro-solid electrolyte, an optical photo of the micro-lithium symmetrical battery, and a micro-test fixture designed to test the micro-battery (Figure S4) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18674/suppl_file/am0c18674_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Probing into the origin of an electronic conductivity surge in a garnet solid-state electrolyte

Revealing the Short‐Circuiting Mechanism of Garnet‐Based Solid‐State Electrolyte

Atomic-Scale Engineering of Grain Boundary Chemistry and Potential for Li-Garnet Solid-State Electrolytes

Solid‐State Electrolytes: Revealing the Short‐Circuiting Mechanism of Garnet‐Based Solid‐State Electrolyte (Adv. Energy Mater. 21/2019)

Microscopic Origin of the Ionic Transport Behaviors in Solid Electrolytes for Li Batteries

High-throughput dynamic modeling of Li migration behaviors in garnet electrolyte

(Invited) Achieving High Areal Capacity and Extreme Critical Current Densities through Tailored Garnet Solid Electrolyte Structures

The origin of high electrolyte–electrode interfacial resistances in lithium cells containing garnet type solid electrolytes

Enhanced Performance of Li6.4La3Zr1.4Ta0.6O12 Solid Electrolyte by the Regulation of Grain and Grain Boundary Phases.

The Key Role of Grain Boundary Dynamics in Revolutionizing the Potential of Solid Electrolytes

An Investigation into the Kinetics of $Li^+$ Ion Migration in Garnet-Type Solid State Electrolyte: $Li_7La_3Zr_2O_{12}$

Effect of H+ Exchange & Surface Impurities on Bulk & Interfacial Electrochemistry of Garnet Solid Electrolytes

Local Li + Framework Regulation of a Garnet-Type Solid-State Electrolyte

In-situ optical observation of Li growth in garnet-type solid state electrolyte

Optimizing Li Ion Transport in a Garnet-Type Solid Electrolyte via a Grain Boundary Design

Enhanced Performance of Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 Solid Electrolyte by the Regulation of Grain and Grain Boundary Phases

Inhibiting Formation and Reduction of Li2 CO3 to LiCx at Grain Boundaries in Garnet Electrolytes to Prevent Li Penetration.

In Situ Fabrication of High Ionic and Electronic Conductivity Interlayers Enabling Long-Life Garnet-Based Solid-State Lithium Batteries

Quasi- In Situ XPS Insights into the Surface Chemistry of Garnet-Type Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 Solid-State Electrolytes: The Overlooked Impact of Pretreatments and a Direct Observation of the Formation of LiOH

Inhibiting Formation and Reduction of Li2CO3 to LiCx at Grain Boundaries in Garnet Electrolytes to Prevent Li Penetration

Comprehensive Dopant Screening in Li7La3Zr2O12 Garnet Solid Electrolyte