Abstract:A high-sensitivity fiber-optic strain sensor, based on the Vernier effect and separated Fabry–Perot interferometers (FPIs), is proposed and experimentally demonstrated. One air-cavity FPI is used as a sensing FPI (SFPI) and another is used as a matched FPI (MFPI) to generate the Vernier effect. The two FPIs are connected by a fiber link but separated by a long section of single-mode fiber (SMF). The SFPI is fabricated by splicing a section of microfiber between two SMFs with a large lateral offset, and the MFPI is formed by a section of hollow-core fiber sandwiched between two SMFs. By using the Vernier effect, the strain sensitivity of the proposed sensor reaches <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{1.15 nm/}\mu \varepsilon $</tex-math></inline-formula> , which is the highest strain sensitivity of an FPI-based sensor reported so far. Owing to the separated structure of the proposed sensor, the MFPI can be isolated from the SFPI and the detection environment. Therefore, the MFPI is not affected by external physical quantities (such as strain and temperature) and thus has a very low temperature cross-sensitivity. The experimental results show that a low-temperature cross-sensitivity of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{0.056 } \mu \varepsilon /^ {\circ }{\text{C}}$</tex-math></inline-formula> can be obtained with the proposed sensor. With its advantages of simple fabrication, high strain sensitivity, and low-temperature cross-sensitivity, the proposed sensor has great application prospects in several fields.

Design of an All-Fiber Fabry-Perot Sensor for Strain Measurement in Radiative Environment

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

In-fiber Rectangular Air Fabry-Perot Strain Sensor Based on High-Precision Fiber Cutting Platform

Simultaneous Measurement of Temperature and Strain Based on All-Fiber Fabry-Perot Sensor

High Sensitivity Fabry-Perot Interferometer Based on Offset Splicing Fibers and Vernier Effect for Strain Measurement

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

Pcf-Based Fabry-Perot Interferometric Sensor For Strain Measurement Under High-Temperature

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

Cascaded-cavity Fabry–Perot Interferometer for Simultaneous Measurement of Temperature and Strain with Cross-Sensitivity Compensation

High-sensitivity Strain Sensor with an In-Fiber Air-Bubble Fabry-Perot Interferometer

Highly Integrated Fp/Fbg Sensor for Simultaneous Measurement of High Temperature and Strain

Miniature Optical Fiber Strain Sensor Based on Fabry-Perot Interferometer

High-sensitivity fiber-optic strain sensor based on the Vernier effect and separated Fabry—Perot interferometers

Strain Force Sensor with Ultra-High Sensitivity Based on Fiber Inline Fabry-Perot Micro-Cavity Plugged by Cantilever Taper

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

Simultaneous Measurement of Strain and Temperature Using Fabry–Pérot Interferometry and Antiresonant Mechanism in a Hollow-Core Fiber

A Composite Fabry-Perot Interferometric Sensor with the Dual-Cavity Structure for Simultaneous Measurement of High Temperature and Strain

High Sensitivity, Low Temperature-Crosstalk Strain Sensor Based on a Microsphere Embedded Fabry–Perot Interferometer

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements.

Discrete amplified sensing of temperature and strain