Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Poly(hydroxyurethane-<i>co</i>-thiourethane)s cross-linked with disulfide bonds: Synthesis via isocyanate-free approach, thermomechanical and reprocessing properties

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Novel Polyethylene‐b‐polyurethane‐b‐polyethylene Triblock Copolymers: Facile Synthesis and Application

Polythiourethanes Crosslinked with Dynamic Disulfide Bonds: Synthesis Via Nonisocyanate Approach, Thermomechanical and Reprocessing Properties

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Effect of chemical crosslinking on the structure and mechanical properties of polyurethane prepared from copoly(PPO-THF) triols

Reprocessable polyhydroxyurethane networks crosslinked with trifunctional polyhedral oligomeric silsesquioxanes via Diels-Alder reaction

Polyhydroxyurethane Thermosets From Novolac Epoxide: Synthesis And Its Nanostructured Blends With Poly(Trifluoroethylacrylate)-Block-Poly (N-Vinylpyrrolidone) Diblock Copolymer

Thermoreversible Supramolecular Networks from Poly(trimethylene Carbonate) Synthesized by Condensation with Triuret and Tetrauret

Preparation of Polyurethane‐Urea Elastomers Using Low Molecular Weight Aliphatic Diamines Enabled by Reversible CO2 Chemistry

Synthesis and characterization of biodegradable polyurethanes based onL-cystine/cysteine and poly(ϵ-caprolactone)

Synthesis And Characterization Of Biodegradable Polyurethanes Based On L-Cystine/Cysteine And Poly(Epsilon-Caprolactone)

Synthesis and Liquid Crystalline Properties of New Thermotropic Polyurethanes

Synthesis Of Bis(4 '-Hydroxyphenyl)-Toluene-2,4-Diurethane For Main Chain Liquid Crystalline Poly(Urethane-Ester)S

Oxime-Based and Catalyst-Free Dynamic Covalent Polyurethanes

Epoxy-free synthesis of aromatic dicyclocarbonates and the related strong epoxy hybrid non-isocyanate polyurethanes

Thermoreversible Supramolecular Polyurethanes with Self‐complementary Quadruple Hydrogen‐bonded End Groups

Synthesis and properties of PSF/PTMEG copolyurethanes

Synthesis and shape memory effects of Si–O–Si cross-linked hybrid polyurethanes

Synthesis and properties of self-crosslinkable polyurethane-urea with silsesquioxane formation

Polyhydroxyurethane and Poly(ethylene oxide) Multiblock Copolymer Networks: Crosslinking with Polysilsesquioxane, Reprocessing and Solid Polyelectrolyte Properties