Abstract:Surface erosion caused by solid particle impact frequently occurs in engineering applications involving particulate flow. With the tremendous progress in computational technology, discrete element method (DEM)-based numerical methods have become a powerful means of studying surface erosion. However, the applicability of applied erosion models remains one of the critical challenges in DEM modelling to obtain satisfactory accuracy over a wide range of materials and impact conditions. In this study, an impact energy erosion model (IEEM) that evaluates erosive wear using accumulated impact energy during the impact process is developed. In IEEM, both cutting and deformation wear are considered. A calibration method of the specific energy that combines DEM simulations and abrasive jet tests is established. To quantitatively predict the erosive wear of the target surface eroded by different particles, an energy allocation rule based on the hardness ratio of the target surface to particles is proposed. Its rationality is thoroughly evaluated before embarking on DEM simulations. Subsequently, the accuracy of DEM simulations incorporated with IEEM and the energy allocation rule is comprehensively verified by comparing them with experimental data on ductile, brittle and semi-brittle materials. The results confirm that DEM simulations can reasonably predict the dependence of erosive wear on impact velocities, impact angles and erodent particle hardness, regardless of the material involved. The calibrated specific energy reflects the properties of the material and further determines the wear mechanism. Finally, the influence of critical DEM parameters on erosion prediction is studied. Generally, DEM incorporated with IEEM and the energy allocation rule provides a quantitative erosion prediction framework applicable to different materials and impact conditions. In the future, this framework has the potential to be applied to the erosion prediction of more systems.

Comparison of Solid Particle Erosion Predictions Using the Dense Discrete Phase and Discrete Element Models

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

An Erosion Model for the Discrete Element Method

Simulation of Front End Loader Bucket–soil Interaction Using Discrete Element Method

An Impact Energy Erosion Model with an Energy Allocation Rule for the Discrete Element Method

An improved model for predicting the erosion within the DEM framework

Numerical Investigation of Sand-Bed Erosion by an Upward Water Jet

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Development of a DEM Method for Predicting Wear Distribution on Particle Scale

A coupled SPH–DEM model for erosion process of solid surface by abrasive water-jet impact

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid

Predicting the Permeability Coefficient of Polydispersed Sand Via Coupled CFD–DEM Simulations

Numerical Simulation on the Erosion Characteristics of Dense Particles in the Annular Channel of Downhole Fracture Pipe

A New Approach to DEM Simulation of Sand Production

Numerical Prediction of Solid Particle Erosion in Jet Pumps Based on a Calibrated Model

Investigation of influencing factors of wear in a sandblasting machine by CFD-DEM coupling

A Coarse Graining CFD-DEM Simulation on Contact Erosion of Layered Cohesionless Soils

An algorithm combining sedimentation experiments for pipe erosion investigation

Predicting Erosion in a Non-Newtonian Shear-Thinning Jet Flow with Validated CFD Models from PIV and PTV Measurements

CFD-DEM Simulation of Some Erosion Applications