Abstract:The settling process of cohesive sediment particles exists universally in nature and many engineering fields. Some of them have negative impacts, e.g., leading to the storage loss of reservoir, prolonging the duration of the reclamation project. Thus, understanding and quantifying cohesive sediments settling and flocculation processes are of great importance. In the present work, a three-dimensional model is applied to investigate the cohesive settling process numerically by computational fluid dynamics–discrete element method (CFD–DEM) approach. In the model, the cohesiveness of the sediment particle is modeled by implementing the van der Waals force. The simulation results are in good agreement with the experimental results, which demonstrate the ability of the current model to study the settling and flocculation process. For cohesive particles, the influence of polydispersity on structural density is discussed in two aspects: (a) the particle mean diameter d50 and (b) the geometric standard deviation d85/d15. Furthermore, the results show that the influence of these two parameters is more profound when a large Hamaker constant is applied. We also study the relationship between the maximum value of structural density and the Hamaker constant. The structure density is found to be significantly influenced by Hamaker constant when Hamaker constant is smaller than \(2.0\, \times \,10^{ - 20} \,{\text{J}}\). Besides, for the poly-dispersed system, different from non-cohesive particles, the segregation phenomenon is not obvious for poly-dispersed cohesive particles due to the flocculation phenomenon. Moreover, the excessive pore pressure in sediment bed does not dissipate instantaneously as the non-cohesive sediment bed. And with the increase of the Hamaker constant, the excessive pore pressure dissipation velocity of the sediment bed decreases. In this work, we study the flocculation phenomenon of cohesive particles. It’s found that the influence of cohesive force is more significant on small particles. Since with the reduction of the particle size, the inertial force decreases to a greater extent compared to the cohesive force, the particles’ motion is mainly determined by the cohesive force.

A Coarse Graining CFD-DEM Simulation on Contact Erosion of Layered Cohesionless Soils

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

CFD-DEM Modeling of Suffusion Effect on Undrained Behavior of Internally Unstable Soils

Parallel Hierarchical Multiscale Modelling of Hydro-Mechanical Problems for Saturated Granular Soils

A Coupled FEM/DEM Approach for Hierarchical Multiscale Modelling of Granular Media

Suffusion-induced Deformation and Microstructural Change of Granular Soils: a Coupled CFD–DEM Study

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Numerical Investigations on Evolution Mechanism of Contact Erosion in Layered Soils Considering Particle-scale Parameters

Micromechanical analysis of contact erosion under cyclic loads using the coupled CFD‒DEM method

Micromechanical Investigation of Suffusion and Its Consequence in Gap-Graded Granular Soil at the Opening of Underground Structures Using the Coupled CFD-DEM Method

A coupled CFD–DEM investigation of internal erosion considering suspension flow

An improved model for predicting the erosion within the DEM framework

An Erosion Model for the Discrete Element Method

Modeling the Process of Cohesive Sediment Settling and Flocculation Based on CFD–DEM Approach

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

A Coupled CFD-DEM Investigation into Suffusion of Gap-Graded Soil Considering Anisotropic Stress Conditions and Flow Directions

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Fluid‐solid coupled model for the internal erosion of gap‐graded soil‐rock mixtures with different fines contents: its verification and application

Effects of scaling criteria on modelling of multi-phase flow in the packed bed using coarse grain CFD-DEM

an extended CFD-DEM model based on micropolar fluid and its application in geological engineering