Abstract:With the continuous improvement in the precision of the laser powder bed fusion (LPBF) process, printing parts with highly complex geometries and fine details has been realized. Given the large design freedom provided by LPBF, various shell lattice structures have been designed and fabricated successfully. However, few works focus on predicting and minimizing the discrepancy between as-designed and as-printed structures, which is crucial for the geometric fidelity and resulting structural performance. This is partially due to the complexity of structures with thin-walled features and continuously changing overhang angles. This paper proposed a new method and workflow to predict the printing deviation and conduct the compensation for the thin-walled shell lattice structures fabricated by the high-precision LPBF (hp-LPBF). Numerical simulation, which was used to capture dynamic interaction behavior between the rake, powder particles, and samples, was performed using the discrete element method (DEM) to identify the key factors affecting the deviation prediction. Subsequently, a semi-analytical model was proposed to predict the as-printed thicknesses, in which the molten depth-induced staircase effect, compression-induced thickening effect, and scrape-induced thinning effect were considered. Both inclination angles and wall thickness were observed to have significant influences on the roughness and dimensional accuracy, of which three types of deviation were determined: (1) non-compensable deviation; (2) large but compensable deviation; (3) negligible deviation under 5%. Experimental results show that, by pre-compensation, the geometric deviation of thin walls with thicknesses of 135 μm and 185 μm was controlled to less than 10μm. The effectiveness and generality of this method for the thin-walled shell structures were further demonstrated by a case study of Schwarz Primitive triply periodic minimal surface lattice structure, which is characterized by micro-CT using the proposed workflow to predict and modify the lattice thickness and generate the compensated geometry for printing.

Experimental and Numerical Analysis on the Leading-Edge Bulge Effect During the Recoating Process in Ceramic Stereolithography

Simulation and experimental analysis on the deformation rate on slender rod parts during the recoating process in high viscosity ceramic stereolithography

Design of a Shaping System for Stereolithography with High Solid Loading Ceramic Suspensions

Regulation of residual stress in stereolithography printing of ZrO2 ceramics

Effect of Constrained Surface Texturing on Separation Force in Projection Stereolithography

Investigation on the critical velocity for liquid loss in immersion lithography

Surface Roughness Control of Root Analogue Dental Implants Fabricated Using Selective Laser Melting

Numerical Analysis of Rotating Scans' Effect on Surface Roughness in Laser-Powder Bed Fusion

Rheological Behavior of SiO2 Ceramic Slurry in Stereolithography and Its Prediction Model Based on POA-DELM

Micro-flow investigation on laying process in Al2O3 stereolithography forming

Numerical investigation on Al2O3 droplet spreading and its prediction model exploration based on Harris Hawks optimization-generalized regression neural network in stereolithography

Forming deviation coupling model and control method in the photopolymerization process of ceramic slurry

Achieving high geometric fidelity in vat photopolymerization additive manufacturing through liquid surface support

A Vibration-Assisted Separation Method for Constrained-Surface-Based Stereolithography

Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion

An Analytical Model for Rapid Predicting Molten Pool Geometry of Selective Laser Melting (SLM)

Rapid and high-accuracy forming of ceramic parts by DLP technology based on optimization of shear stress

Investigation of Stereolithography Additively Manufactured Components for Deviations in Dimensional and Geometrical Features

Rotation-Assisted Separation Model of Constrained-Surface Stereolithography.

The development of undercut and bulge on a solidified surface

Computational analysis of yield stress buildup and stability of deposited layers in material extrusion additive manufacturing