Abstract:Shear cutting allows for shaping materials with any length of cutting line with high efficiency and without negative thermal effects, but it causes stresses and deformations in the cutting zone of the material. This has a negative effect on the magnetic properties of the sheet in the areas of the cut edge. The main problem on production lines is to ensure appropriate control of the process so as to obtain the appropriate technological quality of the cut edge, free of not only defects in the form of burrs and shape deviations, but also the minimum deformed zone. This task is difficult due to the large number of control variables, the influence of which on the shaping of the material and the formation of the cut edge is not fully understood. The article attempts to determine the course of the cutting process and to examine the influence of control variables on the formation of the cut edge in the shear-slitting process in which the tools perform a rotary motion. For this purpose, FEM modeling, vision techniques and experimental studies were used. A 3D model of the process was developed, which enables a detailed analysis of the states of stresses, strains, displacements and fracture mechanisms of the material. The simulation results were verified using vision techniques, which were used in the work to observe the flow and cracking mechanisms of the material. Parametric analyses were performed for the process control variables. The research showed a significant influence of the cutting velocity and the clearance between the tools on the formation of the cut edge. The most homogeneous surface of the cut edge with the minimum burr height was obtained for the following parameters: rake angle α = 15–30°, horizontal clearance hc = 0.03 mm and slitting velocity v2 = 15 m/min. The developed results can be useful for controlling the cutting process on production lines in terms of maximum process efficiency while maintaining the appropriate technological quality of the cut edge.

Experimental Investigation and Finite Element Modeling for Improved Shearing Cutting Performance Using Optimized Bio-Inspired Shearing Tool

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

Finite Element Simulation of High-Speed Cutting

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

Mechanism of Saw-Tooth Chip Formation of Titanium Alloy Based on Finite Element Simulation

Research on the cutting performance and contact behavior of a new bionic saw blade segment

Effect of Composite Bionic Micro-Texture on Cutting Performance of Tools

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

Asymmetrical cutting-edge design of broaching tool based on FEM simulation

Research on Force-Saving Mechanism of Cutting Tool with Variable Curvature Directrix Rake Face Configuration

Numerical and Experimental Investigation of the Shear Angle in High-Speed Cutting of Al6061-T6

Finite Element Analysis of High Speed Cutting Tool

Experimental and Finite Element Analysis of Force and Temperature in Ultrasonic Vibration Assisted Bone Cutting

An ANSYS/LS-DYNA simulation and experimental study of circular saw blade cutting system of mulberry cutting machine

Bio-inspired method based on bone architecture to optimize the structure of mechanical workspieces

Bionic design of tools in cutting: Reducing adhesion, abrasion or friction

Finite Element Analysis and Experimental Investigation of Cut Surface Formation of Magnetic Silicon Steel in Shear Cutting

Finite element simulation of cutting process under the worn tool edge geometries

Study on force-thermal characteristics of ball end milling cutter with chamfered edge and micro-textured flank face

Research on bionic force-saving cutting tool based on structure characteristics of limpet's teeth

Anti-fatigue design of ultrasonic bone cutter based on finite element method