Abstract:Research into the 3D printing of self-healing polymers has increased; however, the understanding regarding the relationship between 3D printing (3DP) parameters, material composition, and their impact on resulting material properties remains limited. In this work, we examine how material composition affects the 3DP, thermal, mechanical, and self-healing properties of an extrinsically self-healing resin system based on linear polycaprolactone (PCL) as a healing agent. The polymer system is based on 2-phenoxyethyl acrylate (POEA) and 1,6-hexanediol dimethacrylate (HDDMA) with up to 25 wt % PCL. Upon mixing, the POEA monomer and PCL remain homogeneous at room temperature. Polymerization-induced phase separation (PIPS) occurs following irradiation; this is reflected in photo-DSC analyses and polarized optical microscopy. DSC analyses showed an insensitivity of the glass transition temperature to PCL concentration and an increase in the melting enthalpy that scales with PCL content, further supporting phase separation post polymerization. The addition of PCL also yielded enhanced mechanical properties; for example, a 281% increase in tensile strength was observed when comparing a 20 wt % PCL blend to that of pure POEA. Likewise, self-healing properties improved with PCL content, exhibiting >90% healing efficiency based on toughness for the 20 wt % PCL blend. The incorporation of PCL was found to impact the dimensions and curling of printed specimens, which can be attributed to the presence of phase-separated PCL. A validation matrix was used to determine a balanced print time for 0 and 20 wt % PCL blends; it was found that PCL reduced the required exposure time for printing, resulting in faster prints of similar dimensional precision. Finally, the ability to 3D print various complex geometries using a conventional MSLA printer was demonstrated for the 20 wt % PCL blend. Further understanding of the relationship between 3DP processing, material composition, and material properties will enable highly engineered products capable of applications in biomedical, soft robotics, and aerospace.

Improvement of Isotropic Strength of 3D Printing-Based Self-Healing Capsules by Controlling the Position of Holes

Development of 3D-Printed Self-Healing Capsules with a Separate Membrane and Investigation of Mechanical Properties for Improving Fracture Strength

Simulated and Experimental Investigation of Mechanical Properties for Improving Isotropic Fracture Strength of 3D-Printed Capsules

Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D-Printed Capsules for Self-Healing Cement Composites

Integrated self-monitoring and self-healing continuous carbon fiber reinforced thermoplastic structures using dual-material three-dimensional printing technology

A two-dimensional micromechanical damage-healing model on microcrack-induced damage for microcapsule-enabled self-healing cementitious composites under tensile loading

A Novel 3D-Printing Repair of Surface Cracks for Improving the Mechanical Strength.

Controlling the Fracture Location of Capsules Using the Bonding Surface Characteristics of Photocurable Resin

Novel Three-Dimensional-Printing Strategy Based on Dynamic Urea Bonds for Isotropy and Mechanical Robustness of Large-Scale Printed Products

Investigation on Microcapsule Self‐healing Mechanism of Polymer Matrix Composites Based on Numerical Simulation

Evaluation of Carbon Fiber-Embedded 3D Printed Structures for Strengthening and Structural-Health Monitoring

4D Printed Self-Helix Structure Based on Internal Stress Reversibility

Self‐Healing, Photothermal‐Responsive, and Shape Memory Polyurethanes for Enhanced Mechanical Properties of 3D/4D Printed Objects

Investigating the Structure–Property−Processing Relationship of Polycaprolactone-Based 3D Printed Self-Healing Polymer Blends

Digital light 3D printing of a polymer composite featuring robustness, self-healing, recyclability and tailorable mechanical properties

Study on the healing performance of poly(ε‐caprolactone) filled ultraviolet‐curable 3D printed cyclic trimethylolpropane formal acrylate shape memory polymers

Fast Damage-Healing of Rigid Photocuring 3D Printing Materials Capable of Directly Recycling in 3D Printing

Self‐Healing Materials for 3D Printing

Strength improvement and failure analysis of dissimilar FDM printed single-lap joints with tailored interface geometry

An Experimental Study on the Healing Performance of Complex Capsules Using Multiphase Inorganic Materials for Crack Self-Healing of Cement Mortars

Strength and Toughness Enhancement in 3d Printing Via Bioinspired Tool Path