Abstract:Thermal stress and contact are two pivotal factors influencing the operational lifespan and performance of solid oxide fuel cell (SOFC) stacks. In practical kW-MW SOFC systems, stack boxes are typically constructed using kWclass stack blocks comprising dozens of cells. Temperature distribution affects the thermal stress distribution, thus affecting the contact of the stack. In this work, the thermal stress distribution and contact of a 2.5 kW external-manifold stack composed of 60 repeat units are investigated by using finite element analysis (FEA). To get a more accurate and realistic results, temperature data of a stack measured in an ongoing SOFC system is incorporated into the computational model. The influences of the clamp loads from manifolds, the structure of current collectors, the number of spacer plates, and the thickness of interconnects on the thermal stress distribution and contact of the stack are investigated. In the basic stack, the tensile stress induced by the temperature gradient appears to be the primary cause of the high thermal stress in the air inlet region of top cells. Due to the high-temperature strength of the seal material and endplates, the contact is inferior in cells near endplates. Increasing the clamp loads of manifolds within specified limits leads to a reduction in both the magnitude and area of high thermal stress, concurrently enhancing the stack contact. Strengthening the current collector structure induces more high-stress regions and simultaneously increases the stack contact. The introduction of overmuch spacer plates results in more high stress regions and a deterioration in stack contact. Moreover, increasing the thickness of interconnects introduces more high stress regions, negatively impacting stack contact.

A Novel Application of Bypass Valve for Temperature Difference Mitigation Between the Multi-Stack in a 5kw Solid Oxide Fuel Cell System

Thermal Management of Bypass Valves for Temperature Difference Elimination in a 5 Kw Multi-Stack Solid Oxide Fuel Cell System

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

A Novel Control Scheme to Mitigate Temperature Profile Variation in a SOFC System

A Review Of Heat Transfer And Thermal Management Methods For Temperature Gradient Reduction In Solid Oxide Fuel Cell (Sofc) Stacks

A Reduced-Order Electrochemical Model for Analyzing Temperature Distributions in a Tubular Solid Oxide Fuel Cell Stack

Theoretical model and control-parameter classification analysis for solid oxide fuel cell systems with cooling air bypass into burner

Numerical Analysis of Thermal Stress for a Stack of Planar Solid Oxide Fuel Cells

Comparison of Different Topologies of Thermal Management Subsystems in Multi-Stack Fuel Cell Systems

A novel flow field design with flow re-distribution for advanced thermal management in Solid oxide fuel cell

A Novel SOFC Thermal Management Strategy of SOFC-GT Hybrid System With Anode and Cathode Control Loops

Study on the Thermal-Electrical Balance of the kW-zclass SOFC Stack

Thermal Stress in Full-Size Solid Oxide Fuel Cell Stacks by Multi-Physics Modeling

Afterburner temperature safety assessment for solid oxide fuel cell system based on computational fluid dynamics

Feasibility Study on Supercritical Fuel Cooled Solid Oxide Fuel Cell Stack with Internal Reforming

Numerical Investigation of Air Flow Characteristics for a Compact 5 × 10 Array Tubular Segmented-in-series Solid Oxide Fuel Cell Stack

Transient Thermomechanical Analysis of a Solid Oxide Fuel Cell Stack Based on 3D Multiphysical Field Model

A Novel Flow Channel Design to Achieve High Temperature Homogenization in Solid Oxide Fuel Cell

Thermal Stress and Contact Analysis Utilizing Tested Temperature Data in a Kw-Class External-Manifold Solid Oxide Fuel Cell Stack