Abstract:Objective To study the modeling stress transfer at the interface of cemented prosthesis and femur.Methods assuming that the prosthesis,the cement and the femur are concentric cylinders made of linear elastic and isotropic materials. The axisymmetric interfacial stress transfer model considering thermal effect is established,distribution of axial stress of the prosthesis,the cement and the femur,distribution of the interfacial shear stress at the prosthesis-cement interface and at the cement-femur interface in axial direction is obtained.Results Interfacial failure is the main failure form of prosthesis-cement-femur structure under the external load. Under the effect of residual thermal stress,it's more likely to produce the mixed failure form but not the pure shear failure form. Since the cement has a relatively high thermal expansion coefficient,the existence of thermal effect accelerates the interfacial failure and then aggravates the stress shielding effect. Under a relatively high thermal residual temperature difference,the cobalt-chromium alloy prosthesis material is more likely to lead to the interfacial and femur failure than the Ti-6Al-4V alloy prosthesis material.Conclusion When the prosthesis bears the compress stress,assuming that the prosthesis,the cement and the femur are concentric cylinders made of linear elastic and isotropic material,by using the basic equations of axisymmetric elastic mechanics,the distribution of axial stress of the prosthesis,the cement and the femur,the interfacial shear stress at the prosthesis-cement interface and at the cement-femur interface in axial direction were obtained. Interfacial failure is the main failure form of prosthesis-cement-femur structure under the external load. The existence of thermal residual temperature difference accelerates the failure and the destroy of the prosthesis-cement interface and the cement-femur interface,accelerates the relaxation of the prosthesis,aggravates stress shielding effect of the femur.The main reason for this is that the cement has a relatively high thermal expansion coefficient. The elastic modulus and the thermal expansion coefficient of Ti-6Al-4V material are smaller than that of cobalt-chromium alloy material. The existence of thermal effect decreases the efficiency of interfacial stress transfer,but to a certain degree it alleviates the failure of the interface and the femur,which is unanimous with the clinical findings.

Initial Damage Analysis in Bone Cement-Stem Debonding Procession of Cemented Hip Arthropsty

Bond Strength Analysis of the Bone Cement-Stem Interface of Hip Arthroplasties

Primary loading causes bone cement-stem interface debonding injury

The Biomechanical Study of Intertrochanic Fractures Treated with Cemented Femoral Stem

In Vitro Experimental Investigation of the Integrity of the Stem–Cement Interface

Investigation Of Protein Adsorption Mechanism And Biotribological Properties At Simulated Stem-Cement Interface

Contact damage failure analyses of fretting wear behavior of the metal stem titanium alloy-bone cement interface

The changes in cement stress are affected by cement-mantle thickness in total hip arthroplasty: a theoretical analysis

Theoretical analysis of changes in femoral stresses after total hip arthroplasty]

The contribution of the micropores in bone cement surface to generation of femoral stem wear in total hip replacement

Investigation of Relative Micromotion at the Stem-Cement Interface in Total Hip Replacement.

The influence of bone cement type on production of fretting wear on the femoral stem surface: A preliminary study

Reproduction of Fretting Wear at the Stem-Cement Interface in Total Hip Replacement

Periprosthetic fractures may be more likely in cementless femoral stems with sharp edges

Modeling of Stress Transfer at the Interface of the Cemented Prosthesis and Femur

Mixed-mode loading of the cement–bone interface: a finite element study

Finite Element Analysis of Femoral Stress Changes after Total Hip Arthroplasty

Dynamic stress response of the implant/cement interface: an axisymmetric analysis of a knee tibial component

Experiment investigation on fretting wear and wear debris performance for the stem-cement interface

Femoral Stem Wear in Cemented Total Hip Replacement

Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement