Abstract:Dendrite growth velocity as a function of initial bulk undercooling was systematically studied in situ using high speed thermal imaging of highly undercooled Ni90Cu10 and Ni95Cu5 single phase alloy melts. For these two non-dilute concentrated alloys, the dendrite growth velocity first increased continuously at small and mediate undercooling regimes and then discontinuously to a maximum value at the high undercooling range. A clear plateau appeared in the growth velocity-undercooling curve revealed a gradual transition from mainly solute-controlled growth to mainly thermal-controlled growth, which was very similar to the solidification characteristics of a dilute alloy. The discontinuity appeared in the growth velocity-undercooling relationship was suggested to be induced by the finite solute diffusion speed in the bulk melt ahead of the advancing solid-liquid interface. Microstructure, substructure and microtexture of the two undercooled alloys were characterized using EBSD technique, and the fundamental mechanism behind “spontaneous grain refinement” is elucidated. The microstructure evolution indicated two kinds of grain refinements: one was dendrite remelting induced grain refinement and the other was recrystallization induced grain refinement. It was found that the texture of the as-solidified microstructure was getting more and more random as the initial bulk undercooling increased, which was due to the increased stress and recrystallization in the as-solidified microstructure. New evidence of grain refinement was found in the as-solidified samples. We found that the samples undercooled beyond the critical undercooling had a grain refined microstructure and that this corresponded with a clear discontinuity in the dendrite growth velocity-undercooling curve. Microstructural data suggested that in Ni-Cu alloys grain refinement at a high undercooling was a consequence of a recrystallization process, which contrasted with conventional grain refined alloys where grain refinement appeared to be the result of remelting-induced dendritic fragmentation.

Macrosegregation and thermosolutal convection-related freckle formation in directionally solidified Sn–Ni peritectic alloy in crucibles with different diameters

Thermosolutal convection-induced freckle formation in steady and unsteady directional solidification: Analysis in Sn-Ni peritectic alloy

Macrosegregation and channel segregation formation of faceted mushy zone in solidification of Sn–Ni hypereutectic alloy in a temperature gradient

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Solute enrichment induced dendritic fragmentation in directional solidification of nickel-based superalloys

Geometrical Effect of Freckle Formation on Directionally Solidified Superalloy Cm247 Lc Components

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Numerical simulation of freckle formation in directional solidification of nickel-based superalloy

Study of Dendrite Growth with Natural Convection in Superalloy Directional Solidification Via a Multiphase-Field-lattice Boltzmann Model

Microsegregation of Peritectic Systems in a Temperature Gradient: Analysis in Directionally Solidified Sn–36at.%Ni Peritectic Alloy

The Diffusion-Controlled Remelting/resolidification Process in Directionally Solidified Sn-Mn Peritectic Alloy

Dendrite Coarsening in Directionally Solidified Sn–36 At.%ni Peritectic Alloy in the Presence of the Migration of Secondary Dendrite Arms

Peritectic Reaction and Its Influences on the Microstructures Evolution During Directional Solidification of Fe–Ni Alloys

On oscillatory microstructure during cellular growth of directionally solidified Sn–36at.%Ni peritectic alloy

Freckle Defect Formation Near the Casting Interfaces of Directionally Solidified Superalloys.

Evaluating Freckle Tendency for Electro-Slag Remelting 30crmnsini2a Ingots by Experiments and Simulation

Numerical Simulation of Macrosegregation During Solidification of Binary Alloys

New vision of convection induced freckle formation theory in Nickel-based superalloys by electron microscopy

Modelling freckles and spurious grain formation in directionally solidified superalloy castings

Convection Effects and Banding Structure Formation Mechanism During Directional Solidification of Peritectic Alloys Ii. Theoretical Analysis

Effect of forced convection on the formation of the as-cast structure and macrosegregation of Sn-10wt.% Pb alloy: A numerical study