Abstract:The grain structure and macrosegregation directly affect the mechanical properties of electroslag remelting (ESR) ingots which are important raw materials in industry. In this paper, an axisymmetric multiscale multicomponent transient model based on cellular automaton-finite element (CAFE) method is developed by coupling macroscopic phenomena (including fluid flow, heat and solute transfer) and the mesoscopic structure evolution (e.g. nucleation and grain growth) to predict grain structure and macrosegregation. The solutions of the mass, momentum, energy, solute conservation equations and grain growth kinetics are calculated simultaneously. The single grain information (e.g., the size, shape and aspect ratio) is obtained by minimal oriented bounding box (MOBB) method and statistically analyzed. Firstly, the accuracy of this multiscale mathematical model is validated by comparing grain structures and solute concentration profile from simulation with those from experiments. Secondly, the effects of two processing factors, the melting rate and heat transfer coefficient, on the grain structure and macrosegregation are investigated. When the melting rate increases from 12.7 to 25.5 g/s, the maximum positive segregation index of carbon increases from 4.5 pct to 9 pct and the average grain size decreases from 120.0 to 21.0 mm2. When the heat transfer coefficient increases from 250 to 500 W/(m2 K), the maximum positive segregation index of carbon decreases from 5.6 pct to 3.7 pct and the average grain size increases from 44.6 to 76.8 mm2. Finally, the coupling effect of grain growth and macroscopic fields including fluid flow and macrosegregation is analyzed. When the fluid flow is decoupled from grain growth, the predicted angle between the columnar grain and the ingot axis is 4.85 deg larger than that of fully coupled case and the predicted average length of columnar grain becomes smaller. When the macrosegregation is ignored in the ESR process, the predicted depth of liquid pool decreases by 2.0 mm, and the equiaxed grain zone at the center of the ESR ingot becomes small. This multiscale transient model using CAFE method could be able to set processing parameters for the desired products with adequate accuracy.

Evaluating Freckle Tendency for Electro-Slag Remelting 30crmnsini2a Ingots by Experiments and Simulation

Multicomponent Modeling of Freckle Formation in IN718 Superalloy During Horizontal Directional Solidification and Vacuum Arc Remelting

Geometrical Effect of Freckle Formation on Directionally Solidified Superalloy Cm247 Lc Components

Freckle Prediction Model Incorporating Geometrical Effects for Ni-based Single-Crystal Superalloy Components

Freckle Defect Formation Near the Casting Interfaces of Directionally Solidified Superalloys.

Thermosolutal convection-induced freckle formation in steady and unsteady directional solidification: Analysis in Sn-Ni peritectic alloy

Modelling freckles and spurious grain formation in directionally solidified superalloy castings

Macrosegregation and thermosolutal convection-related freckle formation in directionally solidified Sn–Ni peritectic alloy in crucibles with different diameters

Insight into the sensitivities of freckles in the directional solidification of single-crystal turbine blades

Numerical simulation of freckle formation in directional solidification of nickel-based superalloy

New vision of convection induced freckle formation theory in Nickel-based superalloys by electron microscopy

Numerical Simulation of Grain Structure and Macrosegregation of Electroslag Remelting Process Based on Cellular Automaton-Finite Element Method

Numerical Investigation on Solidification Behavior of Slab Ingot during Electroslag Remelting Process

Quantitative Characterization of Beta Fleck Segregation in a Ti-17 Alloy Ingot Produced by Vacuum Arc Remelting Without Electromagnetic Stirring

Simulation of Macrosegregation in a 36-T Steel Ingot Using a Multiphase Model

Experimental and Numerical Study of Macrosegregation in a 160 Steel Ingot

Finite Element Modeling of Macrosegregation Coupled with Shrinkage Cavity in Steel Ingots Using Arbitrary Lagrangian-Eulerian Model

The Structural Evolution And Segregation In A Dual Alloy Ingot Processed By Electroslag Remelting

Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton Steel Ingot

Formation of ferrospinel layer at the corroded interface between Al 2 O 3 ‐spinel refractory and molten steel in RH refining ladle

Modelling Macrosegregation in a 2.45 Ton Steel Ingot