Abstract:A novel double gates flip-structure enhancement-mode (E-mode) high electron mobility transistor with step field plate (DFF HEMT) is proposed. It features face-to-face double gates, including a top trench MIS gate with a step field plate and a bottom planar MIS gate, which is shorted together. In the on-state, the double gates not only can restore the 2DEG by the higher electric potential, but also can form the electron accumulation layers, and thus increase the saturation output current and reduce the on-resistance. The face-to-face double gates together deplete the 2DEG by using the work function difference to realize E-mode, instead of by etching the AlGaN layer under the gate for the conventional MIS gate E-mode HEMT. The double-gate structure not only avoids etch damage, but also maintains both high threshold voltage and low on-resistance. Meanwhile, the step gate field plate modulates E-field distribution to increase the BV. In order to easily fabricate, the trench gate with step field plate must be located on the top of device, forming the flip-structure. The flip-structure is also beneficial to decrease the leakage current in the substrate. The simulated V-th, BV and I-d of the DFF HEMT are 0.8 V, 465 V and 494 mA/mm, respectively. The FOM of the DFF HEMT is 79.8% and 444.2% higher than those of the conventional MIS-FP HEMT and MIS HEMT.

Enhancement of F MAX of InP-based HEMTs by Double-Recessed Offset Gate Process

Analysis of Passivation Techniques in InP HEMTs and Implementation of an Analytical Model of F(t) Based on the Small Signal Equivalent Circuit

Enhancement-mode GaN HEMT using a combination structure of recessed-gate and p-GaN gate structure

High Performance Flip-Structure Enhancement-Mode HEMT with Face-to-Face Double Gates

Improving Rf Characteristic and Suppress Gate Leakage in Normally-Off Gan-Hemts Using Negative Polarization Effect and Floating Gate for Millimeter-Wave Systems

Novel gate air cavity GaN HEMTs design for improved RF and DC performance

High Performance InGaN Double Channel High Electron Mobility Transistors with Strong Coupling Effect Between the Channels

100-nm T-gate InAlAs/InGaAs InP-based HEMTs with f T = 249 GHz and f max = 415 GHz

Improved Dram Current Density of E-Mode AlGaN/GaN HEMT with Double-Doped P-Gate

Design and Investigation of Recessed-T-Gate Double Channel HEMT with InGaN Back Barrier for Enhanced Performance

Simultaneously Achieving Large Gate Swing and Enhanced Threshold Voltage Stability in Metal/Insulator/n-GaN Gate HEMT

A Double-Gate AlGaN/GaN HEMT with Improved Dynamic Performance

Reducing dynamic on-resistance of p-GaN gate HEMTs using dual field plate configurations

Fabrication of 150-nm T-Gate Metamorphic AlInAs/GaInAs HEMTs on GaAs Substrates by MOCVD

Improved breakdown performance in recessed-gate normally off GaN MIS-HEMTs by regrown fishbone trench

Enhancement-Mode Gan Double-Channel Mos-Hemt with Low On-Resistance and Robust Gate Recess

Simulation and analysis of enhancement-mode AlGaN/GaN HEMT with P-I-N junction gate

Fabrication of 80-Nm T-gate High Indium In0.7Ga0.3As/In0.6Ga0.4As Composite Channels Mhemt on GaAs Substrate with Simple Technological Process

The keys to get high transconductance of AlGaAs/InGaAs/GaAs pseudomorphic HEMTs devices

Fabrication of InP HEMT Devices with Extremely High Fmax

Normally-off GaN HEMTs with InGaN P-Gate Cap Layer Formed by Polarization Doping