Abstract:The integration of electronic devices in aerospace vehicles leads to a significant increase in the heat dissipation, which makes thermal management a severe challenge. Due to the high thermal energy storage capacity and the excellent thermal diffusivity, phase change materials (PCM)/metal foam composite is a potential thermal management material. In order to deepen the understanding of melting behaviour of PCM/metal foam under hypergravity, the numerical model considering natural convection, flow resistance of metal foam, and non-equilibrium heat transfer is proposed, and the effects of inclination angle, hypergravity value, metal foam porosity, and pore density on the melting are analyzed. It shows that the inclination angle has a great influence on the morphology of the melting interface, while has limited influence on the variation of PCM liquid fraction. As the inclination angle changes from 0° to 180°, the heated wall temperature first decreases, and then increases after reaching the lowest value at 45°, which is the optimal inclination angle. With the rise of hypergravity value, natural convection is enhanced, the heated wall temperature is reduced, while the hypergravity value has limited effect on the PCM liquid fraction. Furthermore, with the increase of metal foam porosity, natural convection is enhanced, while the heated wall temperature and the melting time become larger. When the porosity is larger than 0.95, the effect of metal foam on natural convection suppression is greater than that of heat conductivity enhancement, leading to that the performance of PCM/metal foam is worse than that of the pure PCM. Besides, with the decrease of pore density, natural convection is enhanced, the heated wall temperature becomes lower. Therefore, metal foam with lower pore density is preferred. This paper provides guidance to the optimal design of PCM-based heat sink for aerospace applications.

Effect of Supergravity on Melting Phase Change in Metal Foam

Effect of Supergravity on Heat Transfer Characteristics of PCM with the Pore-Scale Lattice Boltzmann Method

Phase Field Simulation of Solidification under Supergravity

Influence of Super-Gravity Coefficient on Spatial Distribution of Solidification Structure in Al-14.5Si Alloys

Influence of supergravity and tilted condition on melting behavior in a thermal storage tank

Numerical investigation on melting behaviour of phase change materials/metal foam composites under hypergravity conditions

Influence of Super Gravity Field on Solidification Structures of Cu98.4 Cr1.6 Alloy

Effect of Trace Zr on Microstructure and Hardness of Al-Zn-Mg-Cu Alloy Prepared under Supergravity

Effects of Super-gravity Field on Solidification Structure and Microhardness of Al-Ni-Cr Alloy

Influence of Microgravity on Melting Performance of a Phase-Change Heat Storage Tank

Effect of filling configurations on melting heat transfer characteristic of phase change materials partially filled with metal foam

Effect of Supergravity Field on the Microstructure and Mechanical Properties of Highly Conductive Cu Alloys

Refining Mechanism and Elevated-Temperature Mechanical Properties of Al-Ce Alloys Solidified under Super Gravity Field

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Effects of High Gravity Field on Microstructure and Properties of ZL205A Alloy

Investigation of Gravity Effect on Phase Change Heat Transfer Using the Lattice Boltzmann Method

Melting characteristics of phase change material inside graded aluminum foam based on tetrakaidecahedron model: Pore-scale simulations

Toward Enhanced Strength and Ductility of Al–14.5Si Alloy via Solidification Under Super‐Gravity Field

Compression effect of metal foam on melting phase change in a shell-and-tube unit

Modeling Metal Foam Enhanced Phase Change Heat Transfer in Thermal Energy Storage by Using Phase Field Method

Unraveling the mechanisms of aluminum solidification under hyper-gravity condition from molecular dynamics simulations