Abstract:A novel solvent‐assisted hydrothermalmethod for fabricating high‐quality Sb2(S,Se)3 thin films and high‐performance (10.75%) solar devices is demonstrated, which not only contributes to improving component(S/Se), morphology, crystallization, and photoelectric properties of the absorber layer but also plays an important role in reducing defects at a deep level. Antimony chalcogenides (Sb2(SxSe1−x)3, 0 < x < 1) have recently gained popularity due to their excellent photoelectric properties. As a newcomer to thin‐film solar cells, the quality of the as‐prepared absorb layer remains the most difficult challenge, owing to its distinct crystal structure. Here, a solvent‐assisted hydrothermal deposition (SHD) technique is developed for direct deposition of high‐quality Sb2(S,Se)3 films; it is realized that the addition of ethanol can regulate the reaction kinetics by regulating the concentration of the Sb source during the deposition procedure. Impressively, under such conditions, the deposition rate of the target absorb layer slows dramatically, resulting in more suitable features, such as large grain size, smooth surface, and proper bandgap, which are beneficial for constructing high performance solar devices. More importantly, using this newly developed SHD strategy, the defect (SbS1) density of the prepared films decreases by more than one order of magnitude, which is believed to benefit carrier transport. As a result, Sb2(S,Se)3 solar cells based on the SHD strategy significantly improve fill factor and short‐circuit current density, yielding a high efficiency of 10.75%. This research offers fresh insights into how to make Sb2(S,Se)3 films and solar cells of higher quality.

Ten Years of Sb2Se3 Thin Film Solar Cells

10 Years of Sb 2 Se 3 Thin Film Solar Cells

Recent Achievements in Solution Processed Antimony Selenosulfide Solar Cells

Development of Antimony Sulfide–selenide Sb2(S, Se)3-based Solar Cells

Characterization of Basic Physical Properties of Sb 2 Se 3 and Its Relevance for Photovoltaics

Magnetron Sputtered Sb2Se3-based Thin Films Towards High Performance Quasi-Homojunction Thin Film Solar Cells

Research progress on tunable band gap antimony sulfoselenide thin films and solar cells

A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells

Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency

Sputtered and Selenized Sb2Se3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 Mv

Sb2Se3 Solar Cells Fabricated Via Close-Space Sublimation

Over 6% Certified Sb2(S,Se)3 Solar Cells Fabricated Via in Situ Hydrothermal Growth and Postselenization

Solvent‐Assisted Hydrothermal Deposition Approach for Highly‐Efficient Sb2(S,Se)3 Thin‐Film Solar Cells

Highly Efficient and Stable Planar Heterojunction Solar Cell Based on Sputtered and Post-Selenized Sb 2 Se 3 Thin Film

Solution‐Processed Sb2(S, Se)3 Seeds‐Assisted Sb2Se3 Thin Film Growth for High Efficiency Solar Cell

Quasi-Vertically Oriented Sb2Se3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 Mv Prepared Via Close-Space Sublimation and Selenization.

Enhanced Sb2Se3 Solar Cell Performance Through Theory-Guided Defect Control

In Situ Sulfurization to Generate Sb2(Se1 − Xsx)3 Alloyed Films and Their Application for Photovoltaics

Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages