Abstract:The Minxian tunnel is a key engineering of the Weiyuan-Wudu expressway that is excavated in layered jointed carbonaceous slate rock mass. During the construction process, the surrounding rocks of the tunnel encountered serious large deformations and failure, which brought about great difficulties to the safety and cost of the tunnel. In order to study the deformation and failure mechanism of the surrounding rocks, a physical model test was conducted, and integrated methods including strain gauges, a digital camera, and noncontact full-field digital imaging correlation technique were used to record the response information of the surrounding rocks. The evolution process of surrounding rocks failure was simulated successfully in the model test, and the deformation characteristics were basically consistent with the actual engineering. The modelling results show that concentrated stresses in the surrounding rocks were very uneven due to developed stratified and jointed rock mass structure. The maximum and minimum concentrated stresses appeared at the vault of the tunnel and left of inverted arc area, and concentration factors were 3.11 and 1.98, respectively. The main forms of surrounding rocks deformation and failure were large area spalling of surface, severe circumferential fractures, serious bending deformations of thin rock layers, and collapse of overlying strata. The maximum displacements occurred at left sidewall and right shoulder of the tunnel and the corresponding actual displacements were 460 mm to 500 mm. Caving and failure took place firstly at several key positions with maximum concentrated stresses or displacements and subsequently gave rise to massive collapse of surrounding rocks.

Failure analysis and treatments of a loess tunnel being constructed in ground fissure area

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Failure mechanism analysis and treatment of tunnels built in karst fissure strata: A case study

Failure analysis and countermeasures of highway tunnel crossing fault fracture zone in coal-bearing strata: A case study

Failure behavior investigation of loess metro tunnel under local-high-pressure water environment

Effect of the longitudinal local wetting-induced collapse on tunnel structure in loess strata

Failure mechanism and countermeasures of rainfall-induced collapsed shallow loess tunnels under bad terrain: A case study

Collapse mechanism and treatments of a deep tunnel in the weathered granite fault zone

Tunnel failure mechanism during loading and unloading processes through physical model testing and DEM simulation

Physical modeling of wetting-induced collapse of shield tunneling in loess strata

Failures in loess slope-tunnel system: An overview of trigging sources, acting mechanism and mitigation strategies

Characteristics and failure analysis of a railway tunnel collapse influenced by cavity in phyllite strata

Characteristics and treatment measures of tunnel collapse in fault fracture zone during rainfall: A case study

Research on subway shield tunnel induced by local water immersion of collapsible loess

Model Test Studies on Ground Subsidence and Cracks Induced by Tunneling in Weak Rock Mass with High Water Content

Geomechanical Model Experiment Study on Deformation and Failure Mechanism of the Mountain Tunnel in Layered Jointed Rock Mass

Analysis of Damage Mechanism of Tunnel Lining Structure under the Coupling Action of Active Fault

Failure mechanism and countermeasures of limestone tunnel collapse due to rainfall under complex terrain: A case study

Model test study on the influence of the collapsibility of loess stratum on an urban utility tunnel

Deformation and failure analysis of surrounding rock mass in deep buried tunnels subjected to excavation

Failure Mechanism of Tunnel Lining Joints and Bolts with Uneven Longitudinal Ground Settlement