Abstract:Due to the increasing global demand for industrial gas, the development of large-scale cryogenic air separation systems has attracted considerable attention in recent years. Increasing the height of the adsorption bed in a vertical radial flow adsorber used in cryogenic air separation systems may efficiently increase the treatment capacity of the air in the adsorber. However, uniformity of the flow distribution of the air inside the adsorber would be deteriorated using the height-increasing method. In order to reduce the non-uniformity of the flow distribution caused by the excessive height of adsorption bed in a vertical radial flow adsorber, a novel parallel connection method is proposed in the present work. The experimental apparatus is designed and constructed; the Computational Fluid Dynamics (CFD) technique is used to develop a CFD-based model, which is used to analyze the flow distribution, the static pressure drop and the radial velocity in the newly designed adsorber. In addition, the geometric parameters of annular flow channels and the adsorption bed thickness of the upper unit in the parallel-connected vertical radial flow adsorber are optimized, so that the upper and lower adsorption units could be penetrated by air simultaneously. Comparisons are made between the height-increasing method and the parallel connection method with the same adsorber height. It is shown that using the parallel connection method could reduce the difference between the maximum and minimum radial static pressure drop by 86.2% and improve the uniformity by 80% compared with those of using the height-increasing method. The optimal thickness ratio of the upper and lower adsorption units is obtained as 0.966, in which case the upper and lower adsorption units could be penetrated by air simultaneously, so that the adsorbents in adsorption space could be used more efficiently.

Performance Evaluation of a Vertical Radial Flow Adsorber Based on Binary Adsorption of CO2 and H2O

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Analysis of flow distribution in a horizontal-type molecular sieve adsorber

Modeling Axial Distributions of Adsorbent Particle Size and Local Voidage in Expanded Bed

Study of adsorption performance of vertical radial flow dual-bed adsorber used in air sparation unit

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Study on Adsorption Characteristics Optimization of Vertical Radial Flow Adsorber

Investigation on a Vertical Radial Flow Adsorber Designed by a Novel Parallel Connection Method

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Modeling of a Rotary Adsorber for Continuous Capture of Indoor Carbon Dioxide

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

A new method to evaluate the performance of adsorbents for indoor VOCs purification

Prediction of the breakthrough curves of VOC isothermal adsorption on hypercrosslinked polymeric adsorbents in a fixed bed

Kinetics region and model for mass transfer in carbon dioxide absorption into aqueous solution of 2-amino-2-methyl-1-propanol

Real adsorbed solution theory model for the adsorption of CO2 from humid gas on CALF-20

Simulation of flow field in vertical radial flow adsorber with parallel connection device

Heat and mass transfer during H2O/CO2 adsorption separation using activated alumina

Evaluation of CO2/H2O Co-Adsorption Models for the Anion Exchange Resin Lewatit VPOC 1065 under Direct Air Capture Conditions Using a Novel Lab Setup

Numerical Studies for the Co2 Capture Process in A Fluidized-Bed Absorber

Modeling and optimal design of multicomponent vacuum pressure swing adsorber for simultaneous separation of carbon dioxide and hydrogen from industrial waste gas

Performance comparison among three types of adsorbents in CO2 adsorption and recovery from wet flue gas