Abstract:Abstract Transistors on aligned semiconducting carbon nanotubes (A-CNTs) have been considered a promising substitute for mainstream Si transistors to extend integrated circuit (IC) technology owing to their potential advantages of easy miniaturization and high energy efficiency, but whether A-CNT FETs can be scalably fabricated with ultrascaled whole dimensions while maintaining high performance remains questionable. Here, we explore the whole size scaling down potential of A-CNT transistors and demonstrate the possibility of implementing such small-geometry transistors in ultra-large-scale ICs that consist of billions of transistors. A-CNT transistors with a contacted gate pitch (CGP) of 175 nm have been achieved by simultaneously scaling the gate length and the contact length, and exhibit an on-current of 2.24 mA/μm and a peak transconductance of 1.64 mS/μm, surpassing silicon 45 nm node transistors in terms of both size and electronic performance. A static random-access memory (SRAM) cell has been built using six A-CNT transistors in an area of 0.967 μm2, which is comparable to the commercial silicon 90 nm technology node and is the smallest SRAM cell based on non-Si semiconductors. Furthermore, a full-contact structure is introduced between the metal and A-CNTs to achieve a contact resistance as low as 90 Ω·μm and to reduce the dependence on the contact length. A-CNT transistors downsized to a CGP of 55 nm (corresponding to the silicon 10 nm technology node) have been demonstrated to outperform 10 nm Si MOS transistors in terms of carrier mobility and Fermi velocity, indicating the tremendous potential of A-CNT transistors in high-performance digital ICs of sub 10 nm nodes.

Deep-Submicrometer Complementary Metal-Oxide-Semiconductor Transistors Based on Carbon Nanotube Films

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Carbon Nanotube Materials for Future Integrated Circuit Applications

Aligned carbon nanotube integrated circuit downsizing toward a sub-10 nm node

High-Performance Complementary Transistors and Medium-Scale Integrated Circuits Based on Carbon Nanotube Thin Films.

Interface States in Gate Stack of Carbon Nanotube Array Transistors.

Complementary Transistors Based on Aligned Semiconducting Carbon Nanotube Arrays

Improving the Performance of Aligned Carbon Nanotube-Based Transistors by Refreshing the Substrate Surface.

Device and Circuit-Level Performance of Carbon Nanotube Field-Effect Transistor with Benchmarking Against A Nano-Mosfet

High-performance Doping-Free Carbon-Nanotube-based CMOS Devices and Integrated Circuits

Enhancement‐Mode Field‐Effect Transistors and High‐Speed Integrated Circuits Based on Aligned Carbon Nanotube Films

Scaling carbon nanotube CMOS FETs towards quantum limit

Drain-engineered Carbon-Nanotube-film Field-Effect Transistors with High Performance and Ultra-Low Current Leakage

Scaling of N-Type Field-Effect Transistors Based on Aligned Carbon Nanotube Arrays

High-performance N-Type Carbon Nanotube Field-Effect Transistors with Estimated Sub-10-ps Gate Delay

Almost Perfectly Symmetric Swcnt-Based Cmos Devices and Scaling

Complementary carbon nanotube metal–oxide–semiconductor field-effect transistors with localized solid-state extension doping

High-Performance Carbon-Nanotube-Based Complementary Field-Effect-Transistors And Integrated Circuits With Yttrium Oxide

High-Performance Carbon Nanotube Thin-Film Transistor Technology

Can Carbon Nanotube Transistors Be Scaled Down to the Sub-5 nm Gate Length?

Carbon Based High Performance Doping-Free Nanoelectronic and Optoelectronic Devices