Abstract:Superplastic forming, as an advanced manufacturing method, is especially important for producing complex-shaped components for Mg-alloys. Superplasticity can be achieved through grain boundary sliding at elevated temperatures in high-alloyed Mg systems, with a typical grain size < 10 μm stabilized by high densities of intermetallic precipitates. However, it is difficult to stabilize small grains and facilitate grain boundary sliding in low-alloyed systems due to insufficient precipitates. Here, by utilizing a distinctive design strategy, i.e. introducing solute segregation to enhance stability of the fine-grained structure, we obtained an Mg-1Zn-0.2Ca-0.2Zr-0.1Ag (wt. %) alloy achieving ∼450% superplastic strain. Through quasi-in-situ Electron Backscatter Diffraction analyses, we investigated systematically microstructure evolutions during superplastic deformation of the alloy at different strains. It has been found that superplasticity is achieved through the absorption of intragranular dislocations by grain boundaries, which are associated with stress-driven grain boundary migration mediated by disclination-dislocation reactions. By using a theoretical description based on stress-driven grain boundary migration and disclination-dislocation reactions, our model can capture multiple superplasticity mechanisms (e.g., grain boundary sliding and grain rotation), which establishes a fundamental relationship between the evolution of microstructural defects and the strain accommodation during superplastic deformation. Our results not only suggest an effective way to achieve superplasticity in low-alloyed Mg systems, but also provide a new insight to elucidate the nature of superplasticity mechanism by revealing the intrinsic correlation between stress-induced grain boundary migration and disclination/dislocation motion.

Combining gradient structure and supersaturated solid solution to achieve superior mechanical properties in WE43 magnesium alloy

Theory of designing the gradient microstructured metals for overcoming strength-ductility trade-off

Mechanical Properties and Deformation Mechanism of Mg-Al-Zn Alloy with Gradient Microstructure in Grain Size and Orientation

Gradient structure induced simultaneous enhancement of strength and ductility in AZ31 Mg alloy with twin-twin interactions

Strengthening of Mg Alloy with Multiple RE Elements with Ag and Zn Doping via Heat Treatment

High-strength GWZ1031K alloy with gradient structure induced by surface mechanical attrition treatment

Ductility enhancement mechanism of AZ31 magnesium alloy with through-thickness symmetrical gradient structure prepared by hard plate rolling

Effect of twin assisted precipitation on the microstructure and mechanical properties of gradient structure Mg-Gd-Zn-Zr alloy

Development of Gradient Concentrated Single-Phase Fine Mg-Zn Particles and Effect on Structure and Mechanical Properties

Superplastic Deformation Mechanisms of Coarse-Grained Rolled Mg-4Y-3RE Magnesium Alloy

A New Approach of a Gradient Nanograined Surface Layer for Mg-3Al-1Zn Alloy Induced by SMRGT

Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system

Nano‐Dual‐Phase Metallic Glass Film Enhances Strength and Ductility of a Gradient Nanograined Magnesium Alloy

Realizing ultra-fine grains and ultra-high strength in conventionally extruded Mg-Ca-Al-Zn-Mn alloys: The multiple roles of nano-precipitations

Strain Hardening and Tensile Behaviors of Gradient Structure Mg Alloys with Different Orientation Relationships

Designing a gradient structure in a Ni-based superalloy to improve fretting fatigue resistance at elevated temperatures through an ultrasonic surface rolling process

Microstructure Evolution and Mechanical Properties of Mg-7Gd-3Y-1Nd-2Zn-0.5Zr Alloy During Two-Step Homogenization Heat Treatment

Microstructure, Texture and Mechanical Properties of Extruded AZ31 Mg Alloy During Small Strain Multi-Directional Forging with Gradient Cooling

In situ surface composite and gradient material of Al-Si alloy produced by electromagnetic force

Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification

Strength and ductility improvement in a heterostructured Mg-Gd-Y alloy with inversely-gradient hardness distribution