Abstract:It has been a longstanding challenge for metallic materials with homogeneous structures to escape the common strength-ductility trade-off dilemma. In this work, an unusual dual-gradient structure, consisting of both grain size gradient and strain gradient, was introduced into commercial pure titanium wires by mediating torsion strain and annealing parameters to address this issue. Microstructural characteristics of the annealed and tensile samples were systematically characterized by electron backscattered diffraction and transmission electron microscope to unveil the origin and influence of dual-gradient structure. The results show that the strain and grain size distributions can be controlled by tuning torsion strain followed by partial recrystallization annealing. Specifically, when the torsion angles are 40π and 50π, the corresponding annealed samples are characterized with a gradient decline of both grain size and residual strain from the center to the surface, while the samples with a 20π torsion angle exhibit the opposite gradient characteristics. Compared with homogeneously structured pure titanium with a yield strength of 268MPa, the samples with a 40π torsion angle shows a remarkable yield strength of 379MPa, which increases by 40%, while without sacrificing the uniform elongation. This improved strength-ductility synergy can be attributed to the combined effects of fine grain strengthening, dislocation strengthening, and back stress strengthening, endowed by dual-gradient structure. Dynamic strain adjustments throughout the deformation process help to minimize the hardness difference between soft and hard zones in the heterostructures, promoting better deformation coordination between various layers and ultimately inducing a decent ductility of dual-gradient structure. This study not only offers a new insight and guidance to solve the strength-ductility trade-off dilemma, but also provides an attractive method for industries to fabricate dual-gradient structure in a low-cost and simple way.

Gradient structure induced simultaneous enhancement of strength and ductility in AZ31 Mg alloy with twin-twin interactions

Theory of designing the gradient microstructured metals for overcoming strength-ductility trade-off

Ductility enhancement mechanism of AZ31 magnesium alloy with through-thickness symmetrical gradient structure prepared by hard plate rolling

Achieving Large-Scale Gradient Structure in the AZ31 Magnesium Alloys for Extraordinary Strength-Ductility Synergy by Hard Plate Rolling

Mechanical Properties and Deformation Mechanism of Mg-Al-Zn Alloy with Gradient Microstructure in Grain Size and Orientation

Balanced strength and ductility by asymmetric gradient microstructure in AZ91 Mg alloy

Enhancing the ductility in the age-hardened aluminum alloy using a gradient nanostructured structure

Architecting Unusual Dual-Gradient Structures to Overcome the Strength-Ductility Trade-off in Metallic Materials

Enhanced Strength-Ductility Synergy in High-Entropy Alloys Via Architecting Three-Level Gradient Hierarchical Nanostructure

Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility

Microstructure and mechanical properties of gradient ultrafine-grained Mg-Gd-Zr alloy

Enhanced Strength–Ductility Synergy in Ti55531 Titanium Alloys Through Gradient Microstructural Design Strategy

Strength–ductility Combination of Fine-Grained Magnesium Alloy with High Deformation Twin Density

Effect of twin assisted precipitation on the microstructure and mechanical properties of gradient structure Mg-Gd-Zn-Zr alloy

Extra strengthening and work hardening in gradient nanotwinned metals

Gradient Microstructure Induced Synergetic Strengthening in Strain-Softening Zn Alloy

Superior Strength–ductility Combination in Al Alloys Via Dislocation Gradient Structure

Grain boundary-mediated strain response mechanism of AZ31 gradient- structure Mg alloy plate under uniaxial tensile loading

Enhancing tensile properties of extruded AZ31 rod by introducing gradient bimodal microstructure

Superior Mechanical Properties and Strengthening–toughening Mechanisms of Gradient-Structured Materials

Synergistic Strengthening Mechanism of Gradient Structure AZ31 Magnesium Alloy Plate in Hard Plate Rolling