Abstract:To obtain fine and disordered precipitated phases and coordinate multiple strengthening mechanisms in face -centered cubic (FCC) high entropy alloys (HEAs), the Co30Cr30Fe17Ni17Mo6 HEA was prepared and annealed at various temperatures (800, 1000, and 1200 degrees C for 2 h, furnace cooling). The phase stability, microstructure evolution, and tensile properties were systematically investigated at room and low temperatures. The as-cast alloy is consisted of the FCC phase and primary sigma phase rich (Cr, Mo) element. The as-annealed alloy pre-cipitates a fine and disordered secondary sigma phase from the FCC matrix around the primary sigma phase. The average areal size of the secondary sigma phase gradually increases from 1.848 mu m2 to 2.307 mu m2 with the increase of as -annealed temperature. The highest Gibbs free energy of the FCC phase in thermodynamic and the sluggish diffusion kinetics of elements induce the fine and disordered secondary sigma phase precipitation. The as-annealed HEA has a high yield strength of 557 MPa at A800, increased by 21% compared with the as-cast alloy, and maintains applicable plasticity of 16.91% at 298 K. The as-annealed HEA at A1000 exhibits strength-ductility synergy at 203 K. The high yield strength is attributed to secondary sigma phase strengthening and sigma/FCC inter-face strengthening coordination. Dislocations accumulate and strongly interact at the sigma/FCC interfaces, which induces the formation of back stress in softer matrix phases. The back stress and dislocation cells provide the hardening of the FCC matrix at 298 K. The back stress, the net dislocations, and stack faults are activated in the FCC matrix phase to induce high strain hardening ability at 203 K. The FCC matrix with high strain hardening ability reduces stress concentration and delays crack initiation. The strain gradients are accumulated in the FCC matrix, secondary sigma phase, and primary sigma phase to realize strength-ductility synergy.

Optimize the Mechanical Properties of Al<sub>0.6</sub>CoCrFeNi High-Entropy Alloys by Thermo-Mechanical Processing

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Effect of Heat Treatment on the Microstructure and Mechanical Properties of the Al0.6CoCrFeNi High-Entropy Alloy

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Investigation on Microstructure, Superior Tensile Property and Its Mechanism in Al0.3CoCrFeNi High-Entropy Alloy Via Thermo-Mechanical Processing

Optimizing Mechanical and Magnetic Properties of AlCoCrFeNi High-Entropy Alloy Via FCC to BCC Phase Transformation

Microstructural Characterization and Mechanical Properties of an Al0.5CoCrFeCuNi High-Entropy Alloy in As-Cast and Heat-Treated/quenched Conditions

Microstructure Evolution and Tensile Property of a CuMnFeCoNi High-Entropy Alloy During Thermomechanical Treatment

Microstructure Evolution and Mechanical Properties of an Annealed Dual-Phase CrFeCoNiAl0.7 High-Entropy Alloy

Effect of Co on phase stability and mechanical behavior of CoxCrFeNiMnAl0.3 high entropy alloys with micro/nano hierarchical structure

Microstructural Evolution and Tensile Properties of Al0.3CoCrFeNi High-Entropy Alloy Associated with B2 Precipitates

Effects of Warm-Rolling and Annealing on the Microstructure and Mechanical Properties of Dual-Phase Al0.45CoCrFeNiTi0.25 High-Entropy Alloy

The phase composition characteristics of AlCoCrFeNi high entropy alloy heat-treated by simple normalizing treatment and its effects on mechanical properties

Phase Stability and Mechanical Properties of an Ultra-Fine Grain FeCoNiCu0.4Al0.4 High Entropy Alloy

Phase stability and strengthening behavior of as-annealed Co30Cr30Fe17Ni17Mo6 high entropy alloy at room and low temperatures

High temperature deformation behavior of dual-phase Al0.6CoCrFeNi high-entropy alloys

Microstructure and mechanical properties of Al0.4Co0.5V0.6FeNi high-entropy alloys processed by homogenization treatment

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Modifying Transformation Pathways in High Entropy Alloys or Complex Concentrated Alloys Via Thermo-Mechanical Processing

Microstructural Evolution and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy after Cold Rolling and Annealing Treatments