Abstract:To find an effective correlation between the preparation process and the application performance of symmetric supercapacitors, the relationship between the structural characteristics of biomass porous carbon and the electrochemical performances of supercapacitors was studied. Based on a response surface experimental design, the pore structure of biochar produced by the microwave pyrolysis of sargassum was adjusted through the collaborative optimization of key parameters, and graded sargassum porous carbon (SPC) with different pore characteristics was successfully prepared. Three representative samples, SPC−1, SPC−2, and SPC−3, were selected by systematically exploring the effects of the specific surface area (SSA), pore volume (Vtotal), and pore size distribution on the electrochemical performances. The SSA and V total values of SPC−1 were 1500.50 m 2 g −1 and 1.0513 cm 3 g −1 , respectively. The large number of micropores provided space for electronic storage, allowing it to have an excellent electronic storage capacity. The SSA of SPC−2 was 2019.90 m 2 g −1 , and Vtotal was 1.2241 cm 3 g −1 . The rich micropores resulted in a good charge–discharge rate. The SSA of SPC−3 was as high as 2103.20 m 2 g −1 , and Vtotal was 1.4756 cm 3 g −1 . The micron−level mesopores between the SPC−3 carbon skeletons acted as ion buffer reservoirs to shorten the ion diffusion distance and produce excellent rate performances. Subsequently, the morphology and surface properties of porous carbon samples were characterized. The study revealed that hierarchical porous carbon materials with excellent properties must achieve a balance of the microstructure and surface properties and their influence on the electrochemistry. A higher degree of graphitization could bring about a high pore regularity, thereby optimizing the ion transport kinetics. Heteroatoms could increase redox active surface sites and provide additional pseudocapacitance, but the resulting defect structure formed a large number of pores with high edge roughness in the carbon material, which had a certain negative impact on the capacity properties of the materials. The above findings can provide technical support and a theoretical basis for controlling the pore networks and directionally optimizing the performances of supercapacitors by adjusting the pore structure of biochar.

Preparation of Nitrogen and Sulfur Co-doped and Interconnected Hierarchical Porous Biochar by Pyrolysis of Mantis Shrimp in CO2 Atmosphere for Symmetric Supercapacitors

Nitrogen and Sulfur Co-doped Hierarchical Porous Biochar Derived from the Pyrolysis of Mantis Shrimp Shell for Supercapacitor Electrodes

Cooking Carbon with Protic Salt: Nitrogen and Sulfur Self-Doped Porous Carbon Nanosheets for Supercapacitors

Preparation of hierarchical porous carbon by pyrolyzing sargassum under microwave: The internal connection between structure−oriented regulation and performance optimization of supercapacitors

N, S Co-doped hierarchical porous carbon rods derived from protic salt: Facile synthesis for high energy density supercapacitors

Preparation of Porous Biochar and Its Application in Supercapacitors

3D nitrogen and sulfur co-doped hierarchical porous carbon derived from mung bean jelly for high performance supercapacitors

Chitosan-derived large surface area porous carbon via microphase separation engineering of pore-regulation and nitrogen-doping coupling for high-performance supercapacitors

Preparation of biomass-based N, P, and S co-doped porous carbon with high mesoporosity based on the synergistic effect of NaOH/thiourea and melamine phosphate and its application in high performance supercapacitors

Hierarchical Porous Heteroatoms—Co-Doped Activated Carbon Synthesized from Coconut Shell and Its Application for Supercapacitors

Preparation of natural N/O/S co-doped biomass-derived carbon materials for supercapacitors using multistage gas self-exfoliation effect

Rational construction of hierarchical porous carbon with ultrahigh specific surface area and rich heteroatoms toward high-performance supercapacitors

A Sustainable Strategy to Prepare Porous Carbons with Tailored Pores from Shrimp Shell for Use As Supercapacitor Electrode Materials

One‐Step Carbonization Synthesis of N, S Co‐Doped Carbon Materials Derived from Agricultural Waste Peanut Shells for High‐Performance Symmetric Supercapacitors

Nitrogen-enriched hierarchical porous carbon with enhanced performance in supercapacitors and lithium-sulfur batteries

Composite of macroporous carbon with honeycomb-like structure from mollusc shell and NiCo(2)O(4) nanowires for high-performance supercapacitor.

Sulfur and nitrogen co-doping of peanut shell-derived biochar for sustainable supercapacitor applications

Biomass-derived nitrogen-doped porous carbons with tailored hierarchical porosity and high specific surface area for high energy and power density supercapacitors

Facile synthesis of chitosan derived heteroatoms-doped hierarchical porous carbon for supercapacitors

Multi-heteroatom-doped Hierarchical Porous Carbon Derived from Chestnut Shell with Superior Performance in Supercapacitors

An environment-friendly strategy to prepare oxygen-nitrogen-sulfur doped mesopore-dominant porous carbons for symmetric supercapacitors