Abstract:As a promising electrode material for supercapacitors , porous carbon has received widespread attention. However, taking into account of the capacitive performance, the cost and environmental protection, the practicability of the carbon previously reported is still unsatisfactory. Therefore, it is meaningful and challenging to develop a proper carbon material. In the present work, N, O, P co-doped porous carbon materials are prepared from poplar catkin biomass wastes with a two-step chemical activation method by using H 3 PO 4 and K 2 CO 3 , separately. Specifically, the optimal HKPC-1-2.0 possesses a multi-level pore structure with an ultra-high specific surface area (2133 m 2 g −1 ) and a suitable micropore percentage (52.8 %). As a result, HKPC-1-2.0 displays a specific capacitance of 296.2 F g −1 at 1.0 A g −1 in the three-electrode system by using 6.0 M KOH as electrolyte. More importantly, the symmetrical HKPC-1-2.0//HKPC-1-2.0 device exhibits a high capacity retention rate of 100.1 % even after 40,000 charge-discharge cycles at 1.0 A g −1 . The co-doping of the heteroatoms and the hierarchical network with suitable pore size distribution are advantageous for the storage and transportation of ions, therefore leading to the encouraging capacitive performance. This work not only offers a low-cost and high-performance carbon electrode material for supercapacitors but also develops an environmentally-friendly strategy for effectively conversing biomass wastes to high value-added products.

Multi-heteroatom-doped Hierarchical Porous Carbon Derived from Chestnut Shell with Superior Performance in Supercapacitors

Porous carbon derived from cashew nut husk biomass waste for high-performance supercapacitors

Ultra-high specific surface area porous carbon derived from chestnut for high-performance supercapacitor

N-doped porous carbon derived from walnut shells with enhanced electrochemical performance for supercapacitor

Heteroatoms co-doped multi-level porous carbon as electrode material for supercapacitors with ultra-long cycle life and high energy density

Easily Prepared Wood–Derived Hierarchically Porous Carbon for High–Performance Supercapacitors

Houttuynia-derived nitrogen-doped hierarchically porous carbon for high-performance supercapacitor

3D nitrogen and sulfur co-doped hierarchical porous carbon derived from mung bean jelly for high performance supercapacitors

Biomass-derived nitrogen-doped porous carbons with tailored hierarchical porosity and high specific surface area for high energy and power density supercapacitors

Facile synthesis of heteroatom-doped hierarchical porous carbon with small mesopores for high-performance supercapacitors

Three-dimensional Nitrogen-Doped Hierarchical Porous Carbon Derived from Cross-Linked Lignin Derivatives for High Performance Supercapacitors

Rational construction of hierarchical porous carbon with ultrahigh specific surface area and rich heteroatoms toward high-performance supercapacitors

Biomass derived N/O self-doped porous carbon for advanced supercapacitor electrodes

Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

Facile and low-cost fabrication of interconnected hierarchically porous carbon for high-performance supercapacitors

Nitrogen enriched high specific surface area biomass porous carbon: A promising electrode material for supercapacitors

Facile synthesis of chitosan derived heteroatoms-doped hierarchical porous carbon for supercapacitors

N, O self-codoped hierarchical porous carbon from chitosan for supercapacitor electrode active materials

Oxide-doped hierarchically porous carbon for high-performance supercapacitor

Three-Dimensional Honeycomb-Like Porous Carbon with Both Interconnected Hierarchical Porosity and Nitrogen Self-Doping from Cotton Seed Husk for Supercapacitor Electrode

Hierarchical Porous Heteroatoms—Co-Doped Activated Carbon Synthesized from Coconut Shell and Its Application for Supercapacitors