Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability
Ying-jun YANG,Fu-wei KANG,Da-wei XING,Jian-fei SUN,Qing-ke SHEN,SHEN Jun,Jun SHEN
DOI: https://doi.org/10.1016/s1003-6326(07)60041-7
IF: 3.752
2007-01-01
Transactions of Nonferrous Metals Society of China
Abstract:Bulk amorphous Cu52.5Ti30Zr11.5Ni6 and Cu53.1Ti31.4Zr9.5Ni6 alloys with a high glass forming ability can be quenched into single amorphous rods with a diameter of 5 mm, and exhibit a high fracture strength of 2 212 MPa and 2 184 MPa under compressive condition, respectively. The stress – strain curves show nearly 2% elastic strain limit, yet display no appreciable macroscopic plastic deformation prior to the catastrophic fracture due to highly localized shear bands. The present work shows clearly evidence of molten droplets besides well-developed vein patterns typical of bulk metallic glasses on the fracture surface, suggesting that localized melting induced by adiabatic heating may occur during the final failure event.
metallurgy & metallurgical engineering