Abstract:Tensile rheological behavior of the Zr35Ti30Be27·5Cu7.5 metallic glass under conditions of high strain rates (strain rates ranging from 0.05 s−1 to 0.5 s−1) within the supercooled liquid region was studied. The stress-strain curve reveals that this metallic glass demonstrates non-Newtonian flow characteristics under these circumstances. The peak stress associated with stress overshoot increases as temperature decreases and strain rate increases. However, the steady-state flow stress displays an anomalous decrease due to rapid necking at high strain rates. Subsequently, the thermal processing map of the Zr35Ti30Be27·5Cu7.5 metallic glass was established and analyzed. It reveals that the alloy has relatively excellent thermoplastic forming ability at temperature between 630 K and 655 K and strain rates between 0.05 s−1-0.2 s−1. We found that under strain rates ε ˙ ≥ 10 − 2 s − 1 , the strain rate is the primary factor influencing normalized viscosity. Therefore, we developed a simplified Maxwell-Pulse constitutive model applicable to metallic glass in the supercooled liquid region under high strain rate conditions, by simplifying the constitutive equation for steady-state flow stress using a simplified formula for normalized viscosity calculation. The predictions of this simplified modified model align well with experimental values. By comparing the simplified and unsimplified Maxwell-Pulse constitutive models, the overall fitting accuracy of the simplified model was improved by 3–5%, with the highest improvement of 67% in the steady-state flow stress stage. These results indicate that the modified model accurately reflects the stress-strain relationship for the Zr35Ti30Be27·5Cu7.5 metallic glass under high temperature and high strain rate tensile conditions.

Deformation Behavior of a Ti-based Bulk Metallic Glass Composite in the Supercooled Liquid Region

High temperature deformation behaviors of a CuZr-based bulk metallic glass composite

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Homogeneous plastic deformation in a Cu-based bulk amorphous alloy

Tensile Deformation Mechanism of an In Situ Formed Ti-Based Bulk Metallic Glass Composites

Constitutive model for high temperature deformation behavior of Ti–Zr–Ni–Be bulk metallic glass in supercooled liquid region

Temperature-dependent deformation behavior of a CuZr-based bulk metallic glass composite

Change in free volume during the homogeneous flow of Zr-based bulk metallic glass matrix composite

Deformation and fracture behavior of tungsten fiber-reinforced bulk metallic glass composite subjected to transverse loading

Fracture behavior and deformation-induced structure changes of a Ti-based metallic glass using micro-sized cantilevers

Deformation behavior of thermally rejuvenated Zr-Cu-Al-(Ti) bulk metallic glass

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Determining deformation behaviors in a CuZr-based bulk metallic glass composite

Mechanically Driven Phase Separation and Corresponding Microhardness Change in Cu60Zr20Ti20 Bulk Metallic Glass

The rheological behavior and constitutive model of Zr35Ti30Be27·5Cu7.5 metallic glass under high strain rate tensile conditions within the supercooled liquid region

Structural Evolution in Bulk Metallic Glass under High-Temperature Tension

A Numerical Simulation of a Ni-based Bulk Metallic Glass During Compressive Deformation and Fracture

Microstructure and Deformation Mechanism of Titanium-Based Metallic Glass Matrix Composites

Tensile Elastic Behavior of A Zr-Cu-Ag-Al Bulk Metallic Glass

The cryogenic mechanical property deviation of Ti-based bulk metallic glass composite induced by interstitial element

Deformation-induced microstructural heterogeneity and rejuvenation in a Zr-based bulk metallic glass