Abstract:A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals. • The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated. • The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low. • The performance indicator (R 2 ) of the studied responses was higher than 0.95.

Optimization for Enhanced Electrokinetic Treatment of Air Pollution Control Residues Using Response Surface Methodology Focusing on Heavy Metals Leaching Risk and Extractability

Electrokinetic remediation of petroleum hydrocarbon contaminated soil (I)

Analytical Model and Experiment for Electro-Kinetic Remediation of Contaminated Soil Considering Thermal Diffusion

Using Electrode Electrolytes to Enhance Electrokinetic Removal of Heavy Metals from Electroplating Sludge

Electrochemistry-enhanced peroxymonosulfate activation by CoAl-LDH@biochar for simultaneous treatment of heavy metals and PAHs

Heavy metal removal effectiveness, flow direction and speciation variations in the sludge during the biosurfactant-enhanced electrokinetic remediation

Enhanced Electrokinetic Remediation of Heavy Metals-organic Pollutants Compound Contaminated Red Soils

Whole-Brain Calcium Imaging Reveals an Intrinsic Functional Network in Drosophila

Activated carbon coupled with citric acid in enhancing the remediation of Pb-Contaminated soil by electrokinetic method

Environmental Pollution Control Devices Based on Novel Forms of Carbon: Heavy Metals

Electrokinetical Enhanced Delivery of Acidic Potassium Permanganate and Removal of Copper-Pyrene Compound Pollution in a Red Soil.

A Review of Electrochemical Treatment Processes of Leachate Membrane Concentrate

Multiple approaches to immunotherapy ‐ the new pillar of cancer treatment

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Research progress on remediation of heavy metal contaminated soil by electrokinetic-permeable reactive barrier

Remediation of Multiply Contaminated Ground via Permeable Reactive Barrier and Electrokinetic Using Recyclable Food Scrap Ash (FSA)

The mechanism of acid-washed zero-valent iron/activated carbon as permeable reactive barrier enhanced electrokinetic remediation of uranium-contaminated soil

Advanced Treatment of Paper Mill Wastewater Using Electro-Fenton Process with Novel Catalytic Particle Electrodes

Extracting heavy metals from electroplating sludge by acid and bioelectrical leaching using <i>Acidithiobacillus ferrooxidans</i>

EDTA-enhanced Electrokinetic Remediation of Aged Electroplating Contaminated Soil Assisted by Combining Dual Cation-Exchange Membranes and Circulation Methods

Removal of heavy metals from fly ash using electrodialysis driven by a bioelectrochemical system: a case study of Pb, Mn, Cu and Cd