The mechanism of acid-washed zero-valent iron/activated carbon as permeable reactive barrier enhanced electrokinetic remediation of uranium-contaminated soil

Jiang Xiao,Zhaohui Pang,Shukui Zhou,Luping Chu,Lishan Rong,Yingjiu Liu,Jiali Li,Linyu Tian
DOI: https://doi.org/10.1016/j.seppur.2020.116667
IF: 8.6
2020-08-01
Separation and Purification Technology
Abstract:Zero-valent iron/activated carbon (ZVI/AC) particles can promote the reduction of U(VI) by micro-electrolysis. Therefore, they can be used to develop materials for permeable reactive barrier (PRB). In this study, citric acid(CA) mixed with ferric chloride(FeCl3) was selected as composite electrolyte, and we investigated the feasibility of electrokinetic (EK) coupled with Fe/C-PRB on the remediation of red soil aritificially contaminated with U(VI). Seven EK experiments were conducted to study the effect of the type, location, and amount of PRB media on the removal of U(VI) in soil by the EK-PRB system. The results showed that the ZVI/AC mixture is superior to the single ZVI or AC as the PRB medium. For the EK-PRB system, a moderate increase in the number of PRBs and decrease in the thickness of the PRB in soil chamber can enhanced the removal of U(VI) from the contaminated soil. Under optomied conditions, after the 120h remediation experiment obtained the maximum removal efficiency (80.58±0.99%) of U(VI). Scanning electron microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDS), infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) were used to study the surface properties of the ZVI/AC mixture before and after the reaction. The results demonstrated that the soluble U(VI) was reduced to the insoluble U(IV) in the ZVI/AC mixture, or adsorption of activated carbon or iron corrosion products regardless of the pH distribution. This work provides a green efficient technolony for the recovery of U(VI) from contaminated soil, waste slag or solid waste.
engineering, chemical
What problem does this paper attempt to address?
The main problem this paper attempts to address is the effective remediation of uranium-contaminated soil. Specifically, the researchers explored a method combining Electrokinetic (EK) technology and Permeable Reactive Barrier (PRB) to enhance the removal efficiency of hexavalent uranium (U(VI)) from contaminated soil. By using acid-washed zero-valent iron/activated carbon (ZVI/AC) as PRB material and optimizing the type, location, and quantity of PRB, as well as the type and concentration of electrolytes in the experiments, a highly efficient and green uranium-contaminated soil remediation technology was ultimately achieved. ### Main Problems: 1. **How to effectively remove hexavalent uranium (U(VI)) from uranium-contaminated soil?** - The researchers proposed a method combining Electrokinetic (EK) technology and Permeable Reactive Barrier (PRB), using acid-washed zero-valent iron/activated carbon (ZVI/AC) as PRB material to enhance the removal efficiency of U(VI). 2. **How to optimize the type, location, and quantity of PRB to improve the removal efficiency of U(VI)?** - Through experiments, the effects of different PRB materials (ZVI alone, AC alone, ZVI/AC mixture), PRB location, and quantity on the removal efficiency of U(VI) were studied, and it was found that the ZVI/AC mixture was the most effective as PRB medium. 3. **How to select suitable electrolytes to enhance the dissolution and migration of U(VI)?** - A mixture of citric acid (CA) and ferric chloride (FeCl₃) was used as a composite electrolyte, and its effect on the dissolution and migration of U(VI) was studied. The results showed that this composite electrolyte could significantly improve the removal efficiency of U(VI). ### Solutions: - **Material Selection**: Using a mixture of acid-washed zero-valent iron/activated carbon (ZVI/AC) as PRB material, which has higher removal efficiency compared to using ZVI or AC alone. - **Experimental Design**: By optimizing the type, location, and quantity of PRB, as well as the type and concentration of electrolytes, the removal efficiency of U(VI) was improved. - **Mechanism Analysis**: Through scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), the surface property changes of the ZVI/AC mixture before and after the reaction were studied. It was confirmed that U(VI) was reduced to insoluble U(IV), or adsorbed by activated carbon or fixed by iron corrosion products, thus achieving efficient removal. ### Experimental Results: - Under optimized conditions, after 120 hours of remediation experiments, the maximum removal efficiency of U(VI) reached 80.58 ± 0.99%. - By increasing the quantity of PRB and reducing the thickness of PRB, the removal and recovery efficiency of U(VI) can be further improved. In conclusion, this study provides a green and efficient uranium-contaminated soil remediation technology, offering new ideas and methods for environmental protection and ecological restoration.