Abstract:Coagulation/flocculation is a widely used water and wastewater treatment process due to its low cost, simplicity, and effectiveness. However, the process is not effective in the treatment of per- and polyfluoroalkyl substances (PFAS), the presence and treatment of which is an ongoing challenge for water providers. Here, we explore cationic surfactant-enhanced coagulation as a process modification to target the removal of PFAS in existing coagulation/flocculation systems. Batch experiments, in jar testing apparatus, were performed to assess the removal of two short-chain and two long-chain PFAS at an initial concentration of 10 μg/L with the addition of cetyltrimethylammoniumg chloride (CTAC) as the coagulant-aid. Our findings suggest that elevated coagulant dose (60 mg/L of alum or 100 mg/L of FeCl3) coupled with the addition of a cationic surfactant (1 mg/L of CTAC) significantly enhanced the removal of both short-chain (perfluorobutane sulfonate: PFBS removal to >40%) and long-chain PFAS (perfluorooctanoic acid: PFOA and perfluorooctane sulfonate: PFOS removal to >80%), with FeCl3 showing better performance than alum. Sulfonates (PFBS, PFOS) were shown to be removed more efficiently compared to carboxylates (PFBA, PFOA), presumably due to their higher hydrophobicity leading to better interactions with the flocs. Furthermore, CTAC in combination with traditionally used additives such as Powdered Activated Carbon (PAC), served as a better aid for PFAS treatment and improved the removal of PFBS, PFOA, and PFOS to >98%. This study highlights that introducing a cost-effective pre-treatment with a cationic surfactant to existing conventional treatment systems can improve the performance efficiency in treating PFAS-contaminated waters.

Coagulation-flocculation performance and floc properties of composite bioflocculant PAFC-CBF in treating the surface water

Combination of Compound Bio-flocculant and PAFC for Treatment of Algae-laden Water

Preparation and Application of Slag Compound Flocculant

Preparation of a Novel Inorganic-Biological Composite Flocculant for the Removal of Turbidity and Organic Matter in the Surface Water

Pilot Scale Treatment of Low Turbidity Water Using Compound Bioflocculant and Polymerized Aluminium Ferrum Chloride

Characterization and coagulation–flocculation behavior of polymeric aluminum ferric sulfate (PAFS)

Preparation, characterization and application of a composite bioflocculant

Introduction of Compound Bioflocculant and Its Application in Water Treatment

Removal of Aluminum by Compound Bioflocculant from Low Turbidity Source Water

Influence Factors in Treatment of Low Temperature and Low Turbidity Water by Compound Bioflocculant

Coagulation performance of Al/Fe based covalently bonded composite coagulants for algae removal

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Flocculation Property of Composite Flocculants PAC/CPAM for Polluted Landscape Water Pretreatment

Preparation of a Composite Coagulant: Polymeric Aluminum Ferric Sulfate (PAFS) for Wastewater Treatment

Surfactant-enhanced coagulation and flocculation improves the removal of perfluoroalkyl substances from surface water

Synthesis and Characterization of Composite Flocculant PAFS–CPAM for the Treatment of Textile Dye Wastewater

Synthesis and characterization of composite flocculant PAFS-CPAM by response surface methodology

Treatment of Low Temperature and Low Turbidity Water by Compound Bioflocculant

[Flocculation Characteristics of the Return Sludge in Chemical-Biological Flocculation Process].

Flocculation Mechanism of Compound Bioflocculant CBF-1

Research on application of compound bioflocculant