Abstract:In this work, a composite flocculant (polyferric titanium sulfate-polydimethyldiallylammonium chloride [PFTS-PDMDAAC]) with a rich spatial network structure was prepared for the treatment of simulated wastewater containing polystyrene (PS) micro-nanoparticles. Characterization results showed that the surface of the PFTS-PDMDAAC was a three-dimensional network polymer of chain molecules that exhibited good thermal stability and formed an amorphous polymer containing multiply hydroxyl-bridged titanium and iron. When n(OH- ) : n(Fe) = 1:2, n(PO4 3- ) : n(Fe) = 0.35, n(Ti) : n(Fe) = 1:8, n(DMDAAC) : n(Fe) = 5:100, and the polymerization temperature is 60°C, the prepared composite flocculant has the best effect. The effects of dosage, pH, and agitation intensity on the flocculation properties of PFTS-PDMDAAC were also studied. The optimal removal rates of PS-μm and haze by PFTS-PDMDAAC were 85.60% and 90.10%, respectively, at a stirring intensity of 200 rpm, a pH of 9.0, and a PFTS-PDMDAAC dosage of 20 mg/L. The flocs produced by the PFTS-PDMDAAC flocculation were large and compact in structure, and the flocculation mechanism was mainly based on adsorption bridging. Kaolin played a promoting role in the process of PS-μm removal by PFTS-PDMDAAC floc and accelerated the formation of large and dense flocs. This study provided a reference for the coagulation method to remove micro-nanopollutants in the actual water treatment process. PRACTITIONER POINTS: A composite flocculant with rich spatial network structure (PFTS-PDMDAAC) was prepared. PFTS-PDMDAAC can effectively remove micro-nano polystyrene (PS) in wastewater. The floc produced by PFTS-PDMDAAC is large and compact in structure. The flocculation mechanism of PFTS-PDMDAAC is mainly adsorption bridging.

Preparation of a Novel Inorganic-Biological Composite Flocculant for the Removal of Turbidity and Organic Matter in the Surface Water

Preparation and Application of Slag Compound Flocculant

Preparation, characterization and application of a composite bioflocculant

Novel polyferric titanium silicate/chitosan composite flocculant for organic polymeric pollutant removal: optimization, performance and mechanism

Physicochemical characterization and flocculation performance evaluation of PAC / PMAPTAC composite flocculant

Characterization of a Compound Bioflocculant Produced by Mixed Culture of Rhizobium Radiobacter F2 and Bacillus Sphaeicus F6

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Coagulation performance of Al/Fe based covalently bonded composite coagulants for algae removal

Preparation of composite coagulant for the removal of microplastics in water

Study on the Performance of a Novel Inorganic Polymeric Flocculant

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

A novel bioflocculant produced by Klebsiella sp. and its application to sludge dewatering

Revealing The Characteristics Of A Novel Bioflocculant And Its Flocculation Performance In Microcystis Aeruginosa Removal

Optimization and Characterization of Polysaccharide-Based Bioflocculant Produced by Paenibacillus Elgii B69 and Its Application in Wastewater Treatment

Characterization and flocculation performance of a newly green flocculant derived from natural bagasse cellulose

Synthesis, purification and characterization of polyaluminum ferric chloride (PAFC) with high (Al+Fe) b content

To treat wastewater with wastes: a highly efficient flocculant from fly ash and rice straw

Preparation of inorganic-organic composite coagulants PAFC-PDA and its effects on treating synthetic printing and dyeing wastewater

Preparation of A New-Style Composite Containing A Key Bioflocculant Produced by Pseudomonas Aeruginosa Zju1 and Its Flocculating Effect on Harmful Algal Blooms

Evaluation of a Novel Chitosan-Based Flocculant with High Flocculation Performance, Low Toxicity and Good Floc Properties