Abstract:In the present work, a numerical model for polymer electrolyte membrane fuel cell (PEMFC) has been employed to investigate the effects of porosity and contact angle distributions of the porous layer on the performance of PEMFC. The three-dimensional, two-phase, and non-isothermal flow solver considers heat transfer, electrochemical reaction, and liquid water saturation. Various cases with different cathode gas diffusion layer (GDL) porosities are performed. The results showed that a better performance is achieved when the GDL porosity is increased because of the reduced mass transport resistance of oxygen. The effects of the porosity distributions on the PEMFC performance were examined by comparing the predictions from the cases with non-uniform porosity and uniform porosity in the cathode GDL. It was shown that the current density of the cases with non-uniform porosity is higher than that of the uniform porosity case when the operation voltage is low. This is due to the fact that non-uniform porosity distributions in the cathode GDL enhance the reactant transport. When the operation voltage is high, the current densities of the cases with non-uniform porosity and uniform porosity are almost the same. Moreover, the influence of contact angle distributions in cathode GDL was explored. Various cases with gradient-decreasing, gradient-increasing, and uniform constant contact angles from GDL/channel interface to GDL/catalyst layer interface were studied. It was found that the case with gradient-increasing contact angle has a better performance due to the larger capillary pressure difference to remove more water. The poor performance of the case with gradient-decreasing contact angle is related to the phenomenon of flooding in the catalyst layer.

Improvement of Thermal and Water Management of Air-Cooled Polymer Electrolyte Membrane Fuel Cells by Adding Porous Media into the Cathode Gas Channel

Improved flow field design for air-cooled proton exchange membrane fuel cells

Enhancing Heat Removal and H2O Retention in Passive Air-Cooled Polymer Electrolyte Membrane Fuel Cells by Altering Flow Field Geometry

Enhancing Proton-Exchange Membrane Fuel-Cell Heat Transfer Performance with Embedded Cooling Channel Design: A Systematic Numerical Study

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Numerical studies of liquid water behaviors in PEM fuel cell cathode considering transport across different porous layers

Thermal management improvement of air-cooled proton exchange membrane fuel cell by using metal foam flow field

Thermal Management Analysis of Proton Exchange Membrane Fuel Cell Filled with Phase Change Material in Cooling Channel

Metal-foam-based cathode flow-field design to improve H2O retention capability of passive air cooled polymer electrolyte fuel cells

Numerical Study of Water Transport and Operating Strategy for Fuel Cells with Segmented Water Management Flow Fields

Recent advances in heat and water management of forced-convection open-cathode proton exchange membrane fuel cells

Investigating temperature-driven water transport in cathode gas diffusion media of PEMFC with a non-isothermal, two-phase model

Effects of Cathode Gas Diffusion Layer Porosity and Contact Angle Distributions along Through-Plane Direction on the Performance of Polymer Electrolyte Membrane Fuel Cell

Evaluation of performance and mass transfer characteristics by applying oblique fin flow field to air-cooled PEMFCs under different ambient conditions

Optimal design of a cathode flow field for performance enhancement of PEM fuel cell

Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field

Analyzing Key Factors Influencing Water Transport in Open Air-Cooled PEM Fuel Cells

Three-dimensional multi-phase numerical study for the effect of coolant flow field designs on water and thermal management for the large-scale PEMFCs

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Three‐dimensional simulations for counter‐flow proton exchange membrane fuel cells with thin catalyst‐coated membrane cooled by liquid water

Comparison of Self-Humidification Effect on Polymer Electrolyte Membrane Fuel Cell with Anodic and Cathodic Exhaust Gas Recirculation