Abstract:The proton exchange membrane fuel cell （PEMFC） must ensure sufficient hydration of the proton exchange membrane during operation， and it must also avoid condensed liquid water blocking the mass transfer channel. In order to analyze the effect of cathode relative humidity on the membrane water content and output performance of proton exchange membrane fuel cells， the cathode inlet water content （CIWC） model was established. Firstly， the influence of membrane resistance by temperature and water content is considered in this model， the water content calculation formula of the membrane is derived， and the CIWC model is coupled to the computational fluid dynamics software Fluent for calculation. Secondly， a fuel cell test bench was built to conduct experiments when the operating temperature was 60 °C， the relative humidity of the anode was 100%， and the relative humidity of the cathode was 50%， 75% and 100%， respectively. Finally， the simulated data of CIWC model and Fluent built-in model are compared with the experimental values， and the species distribution of membrane water content， membrane conductivity， and molar fraction of water in the catalytic layer were analyzed on the cathode side. The results show that when the cathode relative humidity is 50%， the accuracy of the CIWC model is improved by 17.67% compared to the Fluent model at a voltage of 0.739 V. The maximum relative error between the CIWC model and the experimental value is 5.66% at 100% cathode relative humidity. With the increase of the relative humidity of the cathode， the membrane water content increases continuously at a voltage of 0.75 V and tends to be saturated at a voltage of 0.6 V， and the membrane water content， the proton conductivity and the molar fraction of the water in the catalytic layer gradually increase in the direction of the flow field from the air inlet to the outlet. When the cathode relative humidity is 75%， the fuel cell output power density is up to 272.08 mW/cm 2 ， and the distribution of membrane water content is more uniform.

Effect of Channel-Rib Width Ratio and Relative Humidity on Performance of a Single Serpentine PEMFC Based on Electrochemical Impedance Spectroscopy

Multiple Effects of Non-Uniform Channel Width along the Cathode Flow Direction Based on a Single PEM Fuel Cell: an Experimental Investigation

Effect of cathode relative humidity on membrane water content and performance of PEMFC

Numerical study of the effect of relative humidity and stoichiometric flow ratio on PEM (proton exchange membrane) fuel cell performance with various channel lengths: An anode partial flooding modelling

Effect of cathode channel structure on the performance of open-cathode proton exchange membrane fuel cell in dry environments

Research for the Influence of Inlet Gas Humidification on PEMFC

Effect of oxidant quantity and humidification temperature on performance of PEMFC with twin inlet and twin outlet flow field

Influence of Operating and Electrochemical Parameters on PEMFC Performance: A Simulation Study

Channel Aspect Ratio Effect for Serpentine Proton Exchange Membrane Fuel Cell: Role of Sub-Rib Convection

Numerical Investigation of PEMFC Performance Based on Different Multistage Serpentine Flow Field Designs

Effects of Flow Channel Geometry on Cell Performance for Pem Fuel Cells with Parallel and Interdigitated Flow Fields

Numerical Study of Cell Performance and Local Transport Phenomena in Pem Fuel Cells with Various Flow Channel Area Ratios

Numerical and Experimental Investigation of the Asymmetric Humidification and Dynamic Temperature in Proton Exchange Membrane Fuel Cell

Characterizing the two-phase flow effect in gas channel of proton exchange membrane fuel cell with dimensionless number

Study on the Effect of Temperature on Pressure Drop and Under-Rib Convection in PEMFC

Effect of humidification of reactive gases on the performance of a proton exchange membrane fuel cell

An EIS approach to quantify the effects of inlet air relative humidity on the performance of proton exchange membrane fuel cells: A pathway to developing a novel fault diagnostic method

Performance uniformity analysis in polymer electrolyte fuel cell using long-term dynamic simulation

INFLUENCE OF ASSYMMETRIC GAS DIFFUSION ELECTRODE ON PERFORMANCE OF AIR-COOLED SELF-HUMIDIFYING PROTON EXCHANE MEMBRANE FUEL CELL

Modeling and Experimental Investigation of the Anode Inlet Relative Humidity Effect on a PEM Fuel Cell

Numerical simulation and experimental study on the effect of cathode relative humidity on the performance of the PEMFC with dead-ended anode