Abstract:The proton exchange membrane (PEM) fuel cell is considered to be one of the most promising alternative clean power generators for portable, mobile and stationary applications because of its low to zero emissions, low-temperature operation, high power density and fast start-up.Fuel (humidified hydrogen) and oxidant (humidified air) are fed into the cathode and anode, respectively. The water vapor in the cell introduced by humidification and produced by the cathode electrochemical reaction will condense to liquid water when the partial pressure of the vapor exceeds its saturation pressure. The resulting two-phase transport of water significantly affects the transport of reactants to the porous electrode and the membrane ohmic resistance, and then the cell performance. For example, liquid water accumulating in the channels and in the pores of the gas diffusion layer (GDL) increases the transport resistance of oxygen to the catalyst layer (CL), even resulting in cathode flooding at high current densities. In addition, the membrane must remain well-hydrated because the proton transport capability in the membrane is proportional to the membrane water content. Therefore, understanding and control of the water transport in the cell are important for improving cell performance. At present, the local distributions and transport of reactants in the cell are difficult to measure due to the small cell sizes; thus, numerical models (including the two-phase transport) have become an important means for understanding the reactant transport, electrochemical reactions, current density distributions, and cell performance.This work presents a complete three-dimensional, two-phase transport model for a PEM fuel cell based on the two-fluid method, in which the two-phase flow of the multi-component reactants and liquid water are coupled with the species transport, electrochemical reactions, proton and electron transport, electro-osmosis and back diffusion of water. Different two liquid water transport equations were developed for the various cell units based on the different liquid water transport mechanisms in the fuel cell. The model is used to investigate the effects of the various flow field designs in the bipolar plates on the cell performance. The improved understanding of the two-phase transport is then used to develop a series of new flow field designs, including the tapered flow field, contracted flow field, and partially blocked or blocked flow fields. The predictions show that the improved flow field designs significantly increase the liquid water removal from the GDL, which enhances the reactant transport rates and improves cell performance.

Characterizing the two-phase flow effect in gas channel of proton exchange membrane fuel cell with dimensionless number

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Influence of Heat Transfer on Gas and Water Transport in Fuel Cells

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Modeling of Two-Phase Transport in Proton Exchange Membrane Electrolyzer Cells for Hydrogen Energy

Lattice Boltzmann Simulations of Liquid Droplets Development and Interaction in A Gas Channel of A Proton Exchange Membrane Fuel Cell

Numerically Investigating Two-Phase Reactive Transport in Multiple Gas Channels of Proton Exchange Membrane Fuel Cells

Effects of Membrane Electrode Assembly Properties on Two-Phase Transport and Performance in Proton Exchange Membrane Electrolyzer Cells

Numerical Simulation of Three-Dimensional Gas/liquid Two-Phase Flow in a Proton Exchange Membrane Fuel Cell

Numerical studies of liquid water behaviors in PEM fuel cell cathode considering transport across different porous layers

Two-Phase Model Of Pem Fuel Cells For Optimal Flow Field Design Of Bipolar Plates

Numerical simulation of two-phase flow in a multi-gas channel of a proton exchange membrane fuel cell

Numerical Investigation of Liquid Water Distribution in the Cathode Side of Proton Exchange Membrane Fuel Cell and Its Effects on Cell Performance

Combined Effects of Flow Channel Configuration and Operating Conditions on PEM Fuel Cell Performance

Numerical simulation of two-phase flow in gas diffusion layer and gas channel of proton exchange membrane fuel cells

PEM Fuel Cell Performance and Its Two-Phase Mass Transport

Numerical study of the effect of relative humidity and stoichiometric flow ratio on PEM (proton exchange membrane) fuel cell performance with various channel lengths: An anode partial flooding modelling

Numerical Study of Cell Performance and Local Transport Phenomena in Pem Fuel Cells with Various Flow Channel Area Ratios

Liquid Water Transport Characteristics and Droplet Dynamics of Proton Exchange Membrane Fuel Cells with 3D Wave Channel

Optimization of channel dimensions and gas diffusion layer thickness based on mass transfer characteristics of proton exchange membrane fuel cell

Numerical Investigation of Liquid Water Dynamics in Wave-Like Gas Channels of PEMFCs