Abstract:Purpose For moderate pressure and high pressure gear pumps, the temperature failure problem of bearings is now of considerable concern because of their heavy loads. However, the compact structure and the efficiency consideration make it extremely difficult to improve the bearing cooling. A self-circulating oil bearing system is developed for gear pumps with self-lubricating bearings to solve this problem. The oil is aspirated in from the low pressure chamber of the gear pump and discharged to the same chamber by using the pressure difference in the journal bearing, thus achieving the self-circulation. Design/methodology/approach An experiment test rig has been built for the feasibility study. The oil flow rate under different speeds has been recorded. Furthermore, the temperatures of the bearings with or without the oil circulation have been compared. Additionally, the oil flow in the test rig has been simulated using computational fluid dynamics codes. Findings The experimental and numerical results agree well. The experimental results indicate that the oil flow rate increases approximately linearly with the speed and the bearing temperature can be lowered successfully. The calculation results indicate that the bearing load capacity is nearly the same. Both the experimental and numerical studies establish that the self-circulating oil bearing system works successfully. Originality value As far as the authors know, it is the first time to find that the self-circulation can be built using the pressure difference in the bearing oil film, and this principle can be applied in the cooling and lubrication of the gear pumps to solve the temperature failure problem.

A Simulation Investigation of Lubricating Characteristics for a Cylindrical Roller Bearing of a High-Power Gearbox

Investigation on sealing gap between ring gear and case in internal gear machines

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Lubrication and stability analysis of nonlinear rotor-bearing system

A Simulation Analysis of Ball Bearing Lubrication Characteristics Considering the Cage Clearance

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Lubricating Simulation Analysis of Connecting Rod Bearing Based on AVL-EXCITE

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

Computational Fluid Dynamics Study of Oil Lubrication in Ball and Roller Bearings

Experimental and numerical investigation on thermodynamic performance of full-floating ring bearings with circumferential oil groove

Effects of oil-air lubrication methods on the internal fluid flow and heat dissipation of high-speed ball bearings

Numerical Investigation of Turbulence Models for a Superlaminar Journal Bearing

Direct Observation of Cavitation Phenomenon and Hydrodynamic Lubrication Analysis of Textured Surfaces

Numerical and Experimental Investigation of Splashing Oil Flow in a Hypoid Gearbox

Composite thermal oil film lubrication model for hybrid journal bearings

Investigation on the Lubrication Heat Transfer Mechanism of the Multilevel Gearbox by the Lattice Boltzmann Method

Numerical and experimental investigation on ball motion with oil rheology and thermal effect in high speed ball bearings

Influence of vibration on the lubrication effect of a splash-lubricated gearbox

An Improved Dynamic Modelling for Exploring Ball Bearing Vibrations from Time-varying Oil Film

Simulation of vibro-impact gear model considering the lubricant influence with a new computational algorithm

Numerical analysis of turbulence effect for coupled journal-thrust water-lubricated bearing with micro grooves