Abstract:This work adopts a dual‐site substitution strategy to enhance the bulk and interfacial stability of O3‐NaNi0.5Mn0.5O2 cathode. The prepared cathode delivers high stability during repeated electrochemical cycles. The introduction of K/Ti can effectively suppress multiple phase transitions, reduce the Na+ vacancy formation energy, induce the formation of a NaF‐rich, thin but stable CEI layer, and improve air stability. High‐capacity O3‐type layered sodium oxides are considered one of the most promising cathode materials for the next generation of Na‐ion batteries (NIBs). However, these cathodes usually suffer from low high‐rate capacity and poor cycling stability due to structure deformation, native air sensitivity, and interfacial side reactions. Herein, a multi‐site substituted strategy is employed to enhance the stability of O3‐type NaNi0.5Mn0.5O2. Simulations indicate that the Ti substitution decreases the charge density of Ni ions and improves the antioxidative capability of the material. In addition, the synergistic effect of K+ and Ti4+ significantly reduces the formation energy of Na+ vacancy and delivers an ultra‐low lattice strain during the repeated Na+ extraction/insertion. In situ characterizations verify that the complicated phase transformation is mitigated during the charge/discharge process, resulting in greatly improved structure stability. The co‐substituted cathode delivers a high‐rate capacity of 97 mAh g−1 at 5 C and excellent capacity retention of 81% after 400 cycles at 0.5 C. The full cell paired with commercial hard carbon anode also exhibits high capacity and long cycling life. This dual‐ion substitution strategy will provide a universal approach for the new rational design of high‐capacity cathode materials for NIBs.

In Situ Secondary Phase Modified Low-Strain Na3Ti(PO3)3N Cathode Achieving Fast Kinetics and Ultralong Cycle Life

In Situ Secondary Phase Modified Low-Strain Na 3 Ti(PO 3 ) 3 N Cathode Achieving Fast Kinetics and Ultralong Cycle Life

Defect-Induced and Synergistic Na-Ion Storage Capability of TiO<sub>2</sub>(B)@MoSe<sub>2</sub>/Carbon Trinity for Ultrafast and Ultralong Cycling

Stable Electrochemical Properties of Titanium Doped LayeredP2-Type Na0.67Ni0.15 Mn0.85O2 Cathode Material for Sodium IonBatteriesH

Stabilizing NASICON-type Na4MnCr(PO4)3 by Ti-substitution toward a high-voltage cathode material for sodium ion batteries

Solid-State Synthesis of Na4Fe3(PO4)2P2O7/C by Ti-Doping with Promoted Structural Reversibility for Long-Cycling Sodium-Ion Batteries.

Titanium Doping Induced the Suppression of Irreversible Phase Transformation at High Voltage for V-based Phosphate Cathodes of Na-Ion Batteries.

Na+-Conductive Na2Ti3O7-Modified P2-type Na2/3Ni1/3Mn2/3O2 Via a Smart in Situ Coating Approach: Suppressing Na+/Vacancy Ordering and P2-O2 Phase Transition

Improved Performance of Na 3 TiMn(PO 4 ) 3 Using a Non-stoichiometric Synthesis Strategy

Na3MnTi(PO4)3/C composite as an anode for Na-ion batteries with superior rate performance and long-term span

An Open Holey Structure Enhanced Rate Capability in a NaTi2(PO4)(3)/C Nanocomposite and Provided Ultralong-Life Sodium-Ion Storage

Dual carbon decorated Na3TiMn(PO4)3 as an advanced cathode for sodium-ion batteries

Confining Ultrafine Tin Monophosphide in Ti3C2Tx Interlayers for Rapid and Stable Sodium Ion Storage

Insights into the Ti4+ Doping in P2-type Na0.67Ni0.33Mn0.52Ti0.15O2 for Enhanced Performance of Sodium-Ion Batteries

Optimal Ti-Substitution in Layered Oxide Cathodes for Na-Ion Batteries

A Carbon Coated NASICON Structure Material Embedded in Porous Carbon Enabling Superior Sodium Storage Performance: NaTi2(PO4)3as an Example

Insights into Ti doping for stabilizing the Na2/3Fe1/3Mn2/3O2 cathode in sodium ion battery

Stabilized O3‐Type Layered Sodium Oxides with Enhanced Rate Performance and Cycling Stability by Dual‐Site Ti4+/K+ Substitution

Nanoscale surface modification of P2-type Na0.65[Mn0.70Ni0.16Co0.14]O2 cathode material for high-performance sodium-ion batteries

In situ growth of Sn nanoparticles confined carbon-based TiO2/TiN composite with long-term cycling stability for sodium-ion batteries

Improving Cycling Performance of the NaNiO2 Cathode in Sodium-Ion Batteries by Titanium Substitution