Abstract:Sodium-ion battery (SIB) is acquiring considerable attention as a viable replacement to lithium-ion battery (LIB) technology in the ever-expanding energy storage market due to its attractive combination of homogeneous profusion in the earth and identical intercalation chemistry to LIB. However, SIB is still a laboratory child as SIBs exhibit slightly lower energy density as compared to those of LIBs. Hence, it is critical to determine a suitable cathode to facilitate facile Na-ion transport as cathode is the key factor affecting cycle life, energy density as well as safety. In case of SIBs, layered transition metal oxides are widely preferred as cathode material due to their excellent high specific capacity as well as their simple synthesis process. In this research, Manganese enriched P2 type quaternary Na 0.6 Fe 0.48 Mn 0.5 Ti 0.01 V 0.01 O 2 (NFMTV) cathode material is studied which shows high capacity and high voltage (4.2V) along with reducing Jahn-Teller (JT) Effect. However, inferior reversibility and capacity fading have still been a challenge, particularly for higher voltage window as lower Na content during discharge process initiates the unavoidable phase transition. To preserve the lattice orientation, a feasible approach is demonstrated in this research by introducing potassium (K) ion into Na ion sites between transition metal oxide (TMO 2 ) layers. This work explains that the K + into Na + ion layers serve as the supporting pillar to hold the stacking pattern intact even for very low Na content at higher voltage. As seen from the SEM and EDS analysis, no apparent alternation happened in surface morphology and crystal structure for a small amount of K doping. Furthermore, the XRD and Rietveld refinement results validate that emplacement of K + ions in the Na sites in the NFMTV crystal structure. It also expands the Na + ion diffusion path and substantially boosts the rate performance and reversibility. Besides, K + ion doping halts the gliding phenomenon and hence, phase transition is impeded which is observed from the improved cyclability and capacity retention.

Titanium Doping Induced the Suppression of Irreversible Phase Transformation at High Voltage for V-based Phosphate Cathodes of Na-Ion Batteries.

V Doping in NASICON‐Structured Na3MnTi(PO4)3 Enables High‐Energy and Stable Sodium Storage

Ti4+ Substitution Suppressing P2-O2 Phase Transition to Construct Stable P2-Na0.67ni0.33mn0.67o2 Cathode for Long-Term Durable Sodium-Ion Batteries

In Situ Secondary Phase Modified Low-Strain Na3Ti(PO3)3N Cathode Achieving Fast Kinetics and Ultralong Cycle Life

In Situ Secondary Phase Modified Low-Strain Na 3 Ti(PO 3 ) 3 N Cathode Achieving Fast Kinetics and Ultralong Cycle Life

Stabilizing NASICON-type Na4MnCr(PO4)3 by Ti-substitution toward a high-voltage cathode material for sodium ion batteries

Insights into Tiny High‐Entropy Doping Promising Efficient Sodium Storage of Na3V2(PO4)2O2F toward Sodium‐Ion Batteries

Potency of Potassium Doping on Na-Ion Sites to Avert Phase Transition in P2 Type Sodium-Ion Battery

Simultaneous Defect Regulation by P-N Type Co-Substitution in a Na3V2(PO4)3/C Cathode for High Performance Sodium Ion Batteries.

High-Entropy Doping NASICON-Cathode Breaks the Kinetic Barriers and Suppresses Voltage Hysteresis for Sodium Ion Batteries

Co-substitution of Mg<SUP>2+</SUP> and Ti<SUP>4+</SUP> in Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> nanoparticles coated with highly conductive carbon nanotubes for superior sodium storage

Achieving a Rapid Na+ Migration and Highly Reversible Phase Transition of NASICON for Sodium‐Ion Batteries with Suppressed Voltage Hysteresis and Ultralong Lifespan

Insights into Ti doping for stabilizing the Na2/3Fe1/3Mn2/3O2 cathode in sodium ion battery

Na+-Conductive Na2Ti3O7-Modified P2-type Na2/3Ni1/3Mn2/3O2 Via a Smart in Situ Coating Approach: Suppressing Na+/Vacancy Ordering and P2-O2 Phase Transition

Improved Electrochemical Performance of High Voltage Cathode Na3V2(PO4)2F3 for Na-ion Batteries Through Potassium Doping

Insights into the enhanced structure stability and electrochemical performance of Ti4+/F− co-doped P2-Na0.67Ni0.33Mn0.67O2 cathodes for sodium ion batteries at high voltage

Dual carbon decorated Na3TiMn(PO4)3 as an advanced cathode for sodium-ion batteries

High-voltage structural evolution and its kinetic consequences for the Na4MnV(PO4)3 sodium-ion battery cathode material

Purifying the Phase of NaTi2(PO4)(3) for Enhanced Na+ Storage Properties

High performance cathode material based on Na3V2(PO4)2F3 and Na3V2(PO4)3 for sodium-ion batteries

Novel titanium vanadate with superior Na+ transport kinetics for rapid charging and low-temperature sodium ion batteries