Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

A Carbon Coated NASICON Structure Material Embedded in Porous Carbon Enabling Superior Sodium Storage Performance: NaTi2(PO4)3as an Example

N-modified carbon-coated NaTi2(PO4)3 as an anode with high capacity and long lifetime for sodium-ion batteries

Nitrogen-doped Carbon Coated Na3V2(PO4)3 with Superior Sodium Storage Capability

An Open Holey Structure Enhanced Rate Capability in a NaTi2(PO4)(3)/C Nanocomposite and Provided Ultralong-Life Sodium-Ion Storage

Size Controlling and Surface Engineering Enable NaTi2(PO4)3/C Outstanding Sodium Storage Properties

Nitrogen-Doped Carbon Coated Na 3 V 2 (PO 4 ) 2 F 3 Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium-Ion Batteries

Dual carbon decorated Na3TiMn(PO4)3 as an advanced cathode for sodium-ion batteries

Construction nasicon-type NaTi2(PO4)3 nanoshell on the surface of P2-type Na0.67Co0.2Mn0.8O2 cathode for superior room/low-temperature sodium storage

Heterogeneous NASICON-Type Cathode With Reversible Multielectron Reaction for High-Performance Sodium-Ion Batteries

Porous Carbon-Coated NaTi2(PO4)(3) with Superior Rate and Low-Temperature Properties

A High Rate and Long Cycling Performance NaTi2(PO4)3 Core–Shell Porous Nanosphere Anode for Aqueous Sodium‐Ion Batteries

Enhanced low-temperature sodium storage kinetics in a NaTi2(PO4)3@C nanocomposite

Interwoven scaffolded porous titanium oxide nanocubes/carbon nanotubes framework for high-performance sodium-ion battery

Carbon Coated Sodium-Titanate Nanotube As an Advanced Intercalation Anode Material for Sodium-Ion Batteries

Highly Reversible and Ultrafast Sodium Storage in NaTi2(PO4)3 Nanoparticles Embedded in Nanocarbon Networks.

NASICON-structured Na3MnTi(PO4)2.83F0.5 cathode with high energy density and rate performance for sodium-ion batteries

V Doping in NASICON‐Structured Na3MnTi(PO4)3 Enables High‐Energy and Stable Sodium Storage

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

NASICON-Structured NaTi2(PO4)3 for Sustainable Energy Storage

Synthesizing Porous NaTi2(PO4)3 Nanoparticles Embedded in 3D Graphene Networks for High-Rate and Long Cycle-Life Sodium Electrodes.

Metal-organic Framework Tin Doped Nickel Phosphide/carbon Composites for High Performance Sodium Ion Batteries