Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

Synthesizing Porous NaTi2(PO4)3 Nanoparticles Embedded in 3D Graphene Networks for High-Rate and Long Cycle-Life Sodium Electrodes.

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

NaTi2(PO4)3@C nanocrystals anchored on B-doped graphene sheets with outstanding electrochemical performances for sodium energy storage

Design Nitrogen (N) and Sulfur (S) Co-Doped 3D Graphene Network Architectures for High-Performance Sodium Storage.

Self-generated Hollow NaTi2(PO4)(3) Nanocubes Decorated with Graphene As a Large Capacity and Long Lifetime Anode for Sodium-Ion Batteries

Na(+) intercalation pseudocapacitance in graphene-coupled titanium oxide enabling ultra-fast sodium storage and long-term cycling

Hierarchical Porous Nanosheets Constructed by Graphene‐Coated, Interconnected TiO2 Nanoparticles for Ultrafast Sodium Storage

ollow NaTi 2 ( PO 4 ) 3 nanocubes decorated with graphene as a large capacity and long lifetime anode for sodium-ion batteries †

Electrospun Na3v2(Po4)(3)/C Nanofibers As Stable Cathode Materials for Sodium-Ion Batteries

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

High Performance Graphene/Ni2 P Hybrid Anodes for Lithium and Sodium Storage Through 3D Yolk-Shell-Like Nanostructural Design.

A Carbon Coated NASICON Structure Material Embedded in Porous Carbon Enabling Superior Sodium Storage Performance: NaTi2(PO4)3as an Example

Enhanced Structural Stability and Volumetric Capacity of a 3D Pyknotic Graphene Conductive Network via a Pillar Effect of Sn Nanoparticles for Sodium-Ion Batteries

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Ostwald Ripening Tailoring Hierarchically Porous Na3 V2 (PO4 )2 O2 F Hollow Nanospheres for Superior High-Rate and Ultrastable Sodium Ion Storage.

3D Graphene Nanosheets Crosslinked Core–Shell FeS2@N, S Co-Doped Porous Carbon for Improved Lithium/Sodium Storage Performance

(Invited) Design Hybrid Nanocomposites As Electrode Materials for High Performance Na-Ion Batteries

Engineering Nanostructured Electrode Materials For High Performance Sodium Ion Batteries: A Case Study Of A 3d Porous Interconnected Ws2/C Nanocomposite

Free-Standing Sandwich-Structured Flexible Film Electrode Composed of Na2Ti3O7 Nanowires@CNT and Reduced Graphene Oxide for Advanced Sodium-Ion Batteries

Codoped Holey Graphene Aerogel by Selective Etching for High-Performance Sodium-Ion Storage

Sulfur Doped Ultra-Thin Anatase TiO2 Nanosheets/graphene Nanocomposite for High-Performance Pseudocapacitive Sodium Storage