Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

Electrospun Na3v2(Po4)(3)/C Nanofibers As Stable Cathode Materials for Sodium-Ion Batteries

Electrospun Na3MnTi(PO4)3/C film: A multielectron-reaction and free-standing cathode for sodium-ion batteries

Design of Na3MnZr(PO4)3/Carbon Nanofiber Free-Standing Cathodes for Sodium-Ion Batteries with Enhanced Electrochemical Performances through Different Electrospinning Approaches

Electrospun Na4Fe3(PO4)2(P2O7) nanofibers as free-standing cathodes for ultralong-life and high-rate sodium-ion batteries

Ultrahigh Rate Binder-Free Na 3 V 2 (PO 4 ) 3 /carbon Cathode for Sodium-Ion Battery

Na3V2(PO4)3/C cathode material with three-dimensional interconnected porous structure constructed using cotton soft tissue as carbon source

High‐Rate, Durable Sodium‐Ion Battery Cathode Enabled by Carbon‐Coated Micro‐Sized Na3V2(PO4)3 Particles with Interconnected Vertical Nanowalls

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

One–Step Synthesis of Three–Dimensional Na3V2(PO4)3/Carbon Frameworks as Promising Sodium–Ion Battery Cathode

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

Design and Construction of 3D Porous Na3V2(PO4)3/C as High Performance Cathode for Sodium Ion Batteries

In-situ fabrication of Na3V2(PO4)3/C thin-film electrode for high-performance sodium-ion batteries

Constructing Micro-Nano Na3V2(PO4)3/C Architecture for Practical High-Loading Electrode Fabrication As Superior-Rate and Ultralong-Life Sodium Ion Battery Cathode

Carbon coated Na3+xV2-xCux(PO4)3@C cathode for high-performance sodium ion batteries

Carbon Nanofiber/Na 3 V 2 (PO 4 ) 2 F 3 Particle Composites as a Self-Standing Cathode for High-Voltage Flexible Sodium-Ion Batteries

In situ redox reaction induced firmly anchoring of Na3V2(PO4)2F3 on reduced graphene oxide & carbon nanosheets as cathodes for high stable sodium-ion batteries

Dual-Carbon-Decorated Na3V2(PO4)3 Material for Sodium-Ion Batteries

Porous Na3V2(PO4)3/C as cathode material for high-rate sodium-ion batteries by sacrificed template method

Na3MnTi(PO4)3/C Nanofiber Free-Standing Electrode for Long-Cycling-Life Sodium-Ion Batteries

Nitrogen-Doped Carbon Coated Na 3 V 2 (PO 4 ) 2 F 3 Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium-Ion Batteries

Nitrogen-doped Carbon Coated Na3V2(PO4)3 with Superior Sodium Storage Capability