Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

Ultrahigh Rate Binder-Free Na 3 V 2 (PO 4 ) 3 /carbon Cathode for Sodium-Ion Battery

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

Ultra-stable carbon-coated sodium vanadium phosphate as cathode material for sodium-ion battery

One–Step Synthesis of Three–Dimensional Na3V2(PO4)3/Carbon Frameworks as Promising Sodium–Ion Battery Cathode

Electrospun Na3v2(Po4)(3)/C Nanofibers As Stable Cathode Materials for Sodium-Ion Batteries

Zero-strain Co-doped Na2FeP2O7/carbon Delivers Superior Rate Capability and Long-Cycle Stability for Sodium Ion Batteries

High-Rate and Long-Cycle Cathode for Sodium-Ion Batteries: Enhanced Electrode Stability and Kinetics via Binder Adjustment

Diatomic Doped Carbon Coating Boosting the High-Rate Performance and Super Long-Cycle Stability of Na3v2(Po4)3 Cathode Material

High‐Rate, Durable Sodium‐Ion Battery Cathode Enabled by Carbon‐Coated Micro‐Sized Na3V2(PO4)3 Particles with Interconnected Vertical Nanowalls

Porous Na3V2(PO4)3/C as cathode material for high-rate sodium-ion batteries by sacrificed template method

VOPO4⋅2H2O Nanosheet Cathode for Enhanced Sodium Storage

High-rate performance and super long-cycle stability of Na3V2(PO4)3 cathode material coated by diatomic doped carbon

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Nanofiber networks of Na3V2(PO4)3 as a cathode material for high performance all-solid-state sodium-ion batteries

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

Design of Na3MnZr(PO4)3/Carbon Nanofiber Free-Standing Cathodes for Sodium-Ion Batteries with Enhanced Electrochemical Performances through Different Electrospinning Approaches

Graphene quantum dots-shielded Na3(VO)2(PO4)2F@C nanocuboids as robust cathode for Na-ion battery

Electrospun Na4Fe3(PO4)2(P2O7) nanofibers as free-standing cathodes for ultralong-life and high-rate sodium-ion batteries

Carbon-Coated Na3v2(Po4)(3) Anchored on Freestanding Graphite Foam for High-Performance Sodium-Ion Cathodes

Three dimensional carbon coated In2S3 nanowires assembled graphene composites as high performance sodium ion battery anode

Rationally designed NASICON-type Na3.75V1.25Mn0.75(PO4)3 cathode towards long life-span sodium ion batteries