Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

High Performance Graphene/Ni2 P Hybrid Anodes for Lithium and Sodium Storage Through 3D Yolk-Shell-Like Nanostructural Design.

Shape‐Assisted 2D MOF/Graphene Derived Hybrids as Exceptional Lithium‐Ion Battery Electrodes

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Graphene-wrapped Ni2P materials: a 3D porous architecture with improved electrochemical performance

Nanostructured Nb2O5 Cathode for High-Performance Lithium-Ion Battery with Super-P and Graphene Compound Conductive Agents

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Synthesizing Porous NaTi2(PO4)3 Nanoparticles Embedded in 3D Graphene Networks for High-Rate and Long Cycle-Life Sodium Electrodes.

Synthesis Of 3d Nitrogen-Doped Graphene/Fe3o4 By A Metal Ion Induced Self-Assembly Process For High-Performance Li-Ion Batteries

Nanocrystalline C-Ni Hybrid Nanoporous Monoliths for Large-Capacity and Ultrahigh-Rate Energy Storage

Graphene Nanowires Anchored to 3d Graphene Foam Via Self-Assembly for High Performance Li and Na Ion Storage

High-Performance Silicon Battery Anodes Enabled by Engineering Graphene Assemblies

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

P‐Doped Ni/NiO Heterostructured Yolk‐Shell Nanospheres Encapsulated in Graphite for Enhanced Lithium Storage

2d Hybrid Anode Based On Sns Nanosheet Bonded With Graphene To Enhance Electrochemical Performance For Lithium-Ion Batteries

Three-dimensional nano assembly of nickel cobalt sulphide/polyaniline@polyoxometalate/reduced graphene oxide hybrid with superior lithium storage and electrocatalytic properties for hydrogen evolution reaction

Ni2p/Graphene Sheets As Anode Materials With Enhanced Electrochemical Properties Versus Lithium

Tailoring Hollow Nanostructures by catalytic strategy for Superior Lithium and Sodium Storage.

(Invited) Design Hybrid Nanocomposites As Electrode Materials for High Performance Na-Ion Batteries

Biomolecule-Assisted Synthesis Of Porous Network-Like Ni(3)S(2)Nanoarchitectures Assembled With Ultrathin Nanosheets As Integrated Negative Electrodes For High-Performance Lithium Storage

Sn‐Based Nanoparticles Encapsulated in a Porous 3D Graphene Network: Advanced Anodes for High‐Rate and Long Life Li‐Ion Batteries

Facile Fabrication Of Hierarchical Porous Rose-Like Nico2o4 Nanoflake/Mnco2o4 Nanoparticle Composites With Enhanced Electrochemical Performance For Energy Storage