Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Three-dimensional nano assembly of nickel cobalt sulphide/polyaniline@polyoxometalate/reduced graphene oxide hybrid with superior lithium storage and electrocatalytic properties for hydrogen evolution reaction

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Hierarchically Hollow and Porous NiO/NiCo2O4 Nanoprisms Encapsulated in Graphene Oxide for Lithium Storage

Hollow NiCo2S4 Nanospheres Hybridized with 3D Hierarchical Porous Rgo/fe2o3 Composites Toward High‐Performance Energy Storage Device

Facile Hydrothermal Fabrication of an α-Ni(OH) 2 /N-Doped Reduced Graphene Oxide Nanohybrid as a High-Performance Anode Material for Lithium-Ion Batteries

Multi-hierarchical Heterostructure of GO/ NiCo2O4/Co3O4 for High Power Lithium-Ion Batteries

Hierarchically Hollow and Porous NiO/NiCo 2 O 4 Nanoprisms Encapsulated in Graphene Oxide for Lithium Storage

Hierarchical Hybrid ZnFe2O4 Nanoparticles/reduced Graphene Oxide Composite with Long-Term and High-Rate Performance for Lithium Ion Batteries

Hierarchically Assembled 3D Nanoflowers and 0D Nanoparticles of Nickel Sulfides on Reduced Graphene Oxide with Excellent Lithium Storage Performances

Hierarchical Nanotubes Constructed by Co9 S8 /MoS2 Ultrathin Nanosheets Wrapped with Reduced Graphene Oxide for Advanced Lithium Storage

Urchin-like alkaline nickel–cobalt carbonate derived Ni3S4/Co3S4 nanoparticles anchored on rGO for lithium/sodium-ion batteries with enhanced capacity

3D-Hierarchical NiO–graphene Nanosheet Composites As Anodes for Lithium Ion Batteries with Improved Reversible Capacity and Cycle Stability

Mo‐Based Ultrasmall Nanoparticles on Hierarchical Carbon Nanosheets for Superior Lithium Ion Storage and Hydrogen Generation Catalysis

Hierarchical Porous NiCo2O4 Nanosheet Arrays Directly Grown on Carbon Cloth with Superior Lithium Storage Performance

Facile Fabrication Of Hierarchical Porous Rose-Like Nico2o4 Nanoflake/Mnco2o4 Nanoparticle Composites With Enhanced Electrochemical Performance For Energy Storage

Coordinating Interface Polymerization with Micelle Mediated Assembly Towards Two‐Dimensional Mesoporous Carbon/CoNi for Advanced Lithium–Sulfur Battery

Covalent Bond Hybrid Nanostructure of N-doped rGO and Ultrathin SnS<sub>2</sub> with High Porosity for Lithium-Ion Batteries

Facile One-Step Hydrothermal Synthesis of the rGO@Ni3V2O8 Interconnected Hollow Microspheres Composite for Lithium-Ion Batteries

Multifunctional Catalytic Hierarchical Interfaces of Ni12 P5 -Ni2 P Porous Nanosheets Enabled Both Sulfides Reaction Promotion and Li-Dendrite Suppression for High-Performance Li-S Full Batteries

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

Growth of 3d Hierarchical Porous Nio@Carbon Nanoflakes on Graphene Sheets for High-Performance Lithium-Ion Batteries