Abstract:Over the past few decades, tremendous efforts have been focused on the development of lithium ion batteries (LIBs) used in portable electronics and electric vehicles because of their high energy density and long cycle life. However, the large-scale application of LIBs is hindered by the high cost and the scarcity of lithium resources. In contrast, sodium ion batteries (SIBs) represent potential alternatives for large-scale energy storage due to low-cost and abundant resources. Nevertheless, the sluggish Na-ion transport and severe volume expansion currently limit the rate performance and stability of the SIBs respectively. To address these issues, one effective approach is to utilize the incorporation of pseudocapacitive charge storage into SIBs. Pseudocapacitive charge storage is based on the faradic reaction that occurs on or near the surface of the electrode materials. Some of the materials exhibit pseudocapacitive features in nature, for example, RuO2, MnO2 and Nb2O5. In addition, other materials display the capacitive characteristics with nanoscale morphologies such as TiO2, MoO2 and V2O5. Previous studies1-2 showed great promise towards high-rate electrodes in LIBs and SIBs driven by a pseudocapacitive mechanism. Inspired by this, it is highly expected to achieve superior rate capability and long cycle life of SIBs by introducing pseudocapacitive charge storage in electrodes. In order to take advantage of fast pseudocapacitive charge storage kinetics, we report a sandwich composite anode material where the ultrafine TiO2 and MoO2 nanoparticles are embedded between the layers of carbon nanotube (CNT) and amorphous carbon. (referred to as CNT-TiO2@MoO2-C). The unique sandwich nanoarchitecture and the ultrafine TiO2 and MoO2 nanoparticle can not only significantly decrease the ion diffusion length but also effectively accommodate the volume expansion. Fig.1 shows the long-term cycling performance of the CNT-TiO2@MoO2-C electrode for over 8000 cycles at a current rate of 10A g–1. After a slow capacity fading in the initial dozens of cycles, a reversible capacity of 200 mAhg–1 was maintained during the subsequent cycles, indicating a superior long-term cyclability. In summary, we reported an innovative design of sandwich nanoscale architecture. Based on this rational and unique morphology, the CNT-TiO2@MoO2-C shows an excellent cycling stability up to 8 000 cycles. References 1.Chen, Z. et al. High-performance sodium-ion pseudocapacitors based onhierarchically porous nanowire composites. ACS Nano 6, 4319–4327 (2012). Chen, C. et al. Na intercalation pseudocapacitance in graphene-coupledtitanium oxide enabling ultra-fast sodium storage and long-term cycling. Nat. Commun. 6, 6929 (2015). Yu, P., Li, C. &Guo, X. Sodium storage and pseudocapacitive charge intextured Li4Ti5O12 thin films. J. Phys. Chem. C 118, 10616–10624 (2014) Acknowledgements This work was supported by the Natural Science Foundation of China (21676165, 21573147 and 21506123), the National Key Research and Development Program (2016YFB0901500). Figure 1

Defect-Induced and Synergistic Na-Ion Storage Capability of TiO<sub>2</sub>(B)@MoSe<sub>2</sub>/Carbon Trinity for Ultrafast and Ultralong Cycling

Ultrafine MoO2-Carbon Microstructures Enable Ultralong-Life Power-Type Sodium Ion Storage by Enhanced Pseudocapacitance

Defects introducing and heterostructures engineering synergistically constructing active sites for achieving stable and fast ion transport in sodium-ion batteries

Introducing Hybrid Defects of Silicon Doping and Oxygen Vacancies into MOF-Derived TiO<sub>2-X</sub>@Carbon Nanotablets Toward High-Performance Sodium-Ion Storage

N-doped 3D carbon encapsulating nickel selenide nanoarchitecture with cation defect engineering: An ultrafast and long-life anode for sodium-ion batteries

Interface-Driven Pseudocapacitance Endowing Sandwiched CoSe 2 /N-Doped Carbon/TiO 2 Microcubes with Ultra-Stable Sodium Storage and Long-Term Cycling Stability

Carbon-bonded, Oxygen-Deficient TiO2 Nanotubes with Hybridized Phases for Superior Na-ion Storage

Introducing Hybrid Defects of Silicon Doping and Oxygen Vacancies into MOF-Derived TiO2-X @Carbon Nanotablets Toward High-Performance Sodium-Ion Storage.

Heterogeneous MoS2 Nanosheets on Porous TiO2 Nanofibers toward Fast and Reversible Sodium‐Ion Storage

Multidimensional Synergistic Architecture of Ti3C2 MXene/CoS2@N-doped Carbon for Sodium-Ion Batteries with Ultralong Cycle Lifespan

Simultaneously formed and embedding-type ternary MoSe2/MoO2/nitrogen-doped carbon for fast and stable Na-ion storage

Synergistic Engineering of Defects and Architecture in Co3O4@C Nanosheets Toward Li/Na Ion Batteries with Enhanced Pseudocapacitances

2D Sandwich-Like Carbon-Coated Ultrathin TiO2@defect-rich MoS2 Hybrid Nanosheets: Synergistic-effect-promoted Electrochemical Performance for Lithium Ion Batteries

Heterostructure Interface Construction of Cobalt/Molybdenum Selenides toward Ultra‐Stable Sodium‐Ion Half/Full Batteries

Hierarchical MoO2@TiO2-Carbon Nanostructure Enable Ultrafast and High-Capacity Na-Ion Storage by Enhanced Pseudocapacitance

Synthesis and Electrochemical Performance of Defected Nano-Micro Structure Sodium/lithium Titanate Composites Materials for Lithium-Ion Batteries

Vacancy‐Rich Ternary Iron Phosphoselenide Multicavity Nanorods: A Highly Reversible and Fast Anode for Sodium‐Ion Batteries

Bundled Defect‐Rich MoS 2 for a High‐Rate and Long‐Life Sodium‐Ion Battery: Achieving 3D Diffusion of Sodium Ion by Vacancies to Improve Kinetics

MoS2‐Coupled Carbon Nanosheets Encapsulated on Sodium Titanate Nanowires As Super‐Durable Anode Material for Sodium‐Ion Batteries

Simultaneous Hierarchical Regulation and Surface Coating of MoTe2 Based Sodium-Ion Battery Anodes with High Capacity and Long Cycle Stability

Boosting the Rate Capability of Multichannel Porous TiO2 Nanofibers with Well-Dispersed Cu Nanodots and Cu2+-doping Derived Oxygen Vacancies for Sodium-Ion Batteries