Abstract:Metal nanowires (NWs) have shown superior advances for the next-generation transparent conducting (TC) materials. Most concerns were focused on uniform conductive films; however, fabrication of a programmed circuit is still lacking. Here, we demonstrate a programmable ultrafast welding method by pulsed laser beam scanning under ambient conditions to achieve a Cu NW pattern-free TC circuit as well as various size films. High-aspect ratio Cu NWs (> 3000) are synthesized through an oleylamine-mediated solution system. Pulsed ultraviolet laser irradiation together with a programmed moving station is set up for the welding of Cu NW networks. Finite element simulations reveal that the transient heating by efficient absorption of UV light (∼ 250 nm) could remove the organic residues on the surface and realize local welding of interlaced NW junctions. With only 10 ms pulsed irradiation, high optoelectronic performance (33 ohm/sq. at 87% transmittance at 550 nm) and excellent stability of the Cu NW TC film have been achieved. The line-by-line and selected route scanning modes could rapidly make large area TC films and directly write flexible circuits. Moreover, completely transparent micron-size UV and blue LED chips are fabricated and successfully lit with bright emission. This method opens up a future way of circuit and device fabrication by direct one-step laser writing.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07962?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07962</a>.Schematics of growth mechanism of Cu NWs; synthesis and characterizations of superfine Cu NWs; SEM images, SAED pattern, EDS spectrum, XPS spectrum, and TEM image; line-by-line scanning routes; UV–vis transmission spectrum; I–V curves measured after1 and 100 cycles; and structure and EL spectrum of the blue LED chip (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07962/suppl_file/am0c07962_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Rapid fabrication of conductive copper patterns on glass by femtosecond Laser-Induced reduction

Selective Deposition of Conductive Copper Films on Glass Surfaces Using Femtosecond Laser Surface Modification and Electroless Plating

Femtosecond Laser Direct Writing of Copper Microelectrodes

Copper circuits fabricated on flexible polymer substrates by a high repetition rate femtosecond laser-induced selective local reduction of copper oxide nanoparticles.

Spatially Modulated Femtosecond Laser Direct Ablation-Based Preparation of Ultra-Flexible Multifunctional Copper Mesh Electrodes and Its Application

Robust metallic micropatterns fabricated on quartz glass surfaces by femtosecond laser-induced selective metallization

Experiment Study of Laser Thermal Enhanced Electrochemical Deposition

Programmed Ultrafast Scan Welding of Cu Nanowire Networks with a Pulsed Ultraviolet Laser Beam for Transparent Conductive Electrodes and Flexible Circuits

Deposition of Durable Micro Copper Patterns into Glass by Combining Laser-Induced Backside Wet Etching and Laser-Induced Chemical Liquid Phase Deposition Methods

Fabrication of patterned transparent conductive glass via laser metal transfer for efficient electrical heating and antibacteria

Laser Fabrication of Low Resistivity Electrode on Glass

Photonic sintering of copper for rapid processing of thick film conducting circuits on FTO coated glass

The Laser Writing of Highly Conductive and Anti-Oxidative Copper Structures in Liquid

Rapid Fabrication of Patterned High-Performance Conductor Poly (vinylidene Fluoride) Surfaces Using a 248nm Excimer Laser

Mask-free patterning of Cu mesh as smart windows by spatially modulated nanosecond laser pulses

Cluster-enabled Patterning of Copper Nanostructures from Aqueous Solution Using a Femtosecond Laser

Single-step Selective Metallization on Insulating Substrates by Laser-Induced Molten Transfer

Study of Conductor Fabrication by Laser Micro-Cladding Electronic Pastes on Glass Substrate

Electroless Deposition of Confined Copper Layers Based on Selective Activation by Pulsed Laser Irradiation

Fast Fabrication Of Copper Nanowire Transparent Electrodes By A High Intensity Pulsed Light Sintering Technique In Air

High‐Efficiency and Low‐Intensity Threshold Femtosecond Laser Direct Writing of Precise Metallic Micropatterns on Transparent Substrate