Abstract:This work presents an investigation on the compressive strain capacity of resisting buckling on an X80 steel corroded pipeline subjected to a bending moment using nonlinear finite element analysis (FEA) validated by full-scale tests. The modelling results indicate that the existing strain-based assessment method is not suitable for pipelines with deep corrosion and has certain application limitations. Consequently, a new evaluation method based on far-field strain was developed to predict the buckling failure of corroded pipelines subjected to bending loads. The influence of the corrosion shape type, corrosion size (i.e., depth d, length L, and width w), pipe geometry, and internal pressure on the critical buckling strain capacity and critical buckling moment of the pipeline were studied using parameter sensitivity analysis to verify the proposed strain criteria. The results illustrate that the variation trends between the critical buckling strain and the critical buckling moment with each factor were consistent, indicating that the proposed novel strain-based evaluation method is effective and applicable. In addition, the buckling resistance of a pipeline with rectangular corrosion is relatively weaker than that with a semi-spherical corrosion pit or cylindrical grooved corrosion under the same defect size. Further, the critical compressive strain capacity of a corroded pipeline is primarily affected by the depth and width of the corrosion, whereas the effect of the corrosion length is relatively insignificant. Moreover, the critical length and width of the corrosion defect affecting the bending capacity of resisting buckling were determined as L∕Dt=20 and w∕πD=0.5, respectively.

A Novel Model for Prediction of Burst Capacity of Corroded Pipelines Subjected to Combined Loads of Bending Moment and Axial Compression

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Development of an empirical model to predict the burst pressure of corroded elbows of pipelines by finite element modelling

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Research on a model-based burst pressure prediction method for pipelines with corrosion defects

Prediction of burst pressure of corroded thin-walled pipeline elbows subjected to internal pressure

Failure pressure analysis of corroded moderate-to-high strength pipelines

Burst Pressure Prediction of Pipes With Internal Corrosion Defects

Analytical prediction of failure pressure for pipeline with long corrosion defect

Theory and Machine Learning Modeling for Burst Pressure Estimation of Pipeline with Multipoint Corrosion

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

The Failure Window Method and Its Application in Pipeline Burst

Study on Evaluation Method for Failure Pressure of Corroded Pipeline

Burst Capacity Estimation Of Pipeline With Colonies Of Interacting Corrosion Defects

Finite element modeling of corrosion defect growth and failure pressure prediction of pipelines

Finite Element Models for the Prediction of the Failure Pressure of Pipelines With Long Corrosion Defects

A novel strain-based assessment method of compressive buckling of X80 corroded pipelines subjected to bending moment load

Burst Capacity Solutions for Submarine Pipeline with Long Corrosion Defects