Abstract:The electrochemical inhomogeneities at interface of metal/solution play an important and often controlling role in localized corrosion of metals. The traditional electrochemical techniques involving potential, current density or ac impedance measurements over bulk specimens can only provide average and whole information. It is necessary to develop in situ imaging techniques for further characterizing electrochemical inhomogeneities at the interface of metal/solution of localized corrosion system. The electrochemical techniques with spatial resolution, including scanning single micro electrode, scanning double micro electrodes and scanning micro chemical probes have been reviewed. The effects of electrochemical inhomogeneities on the corrosion behavior, and the mechanism for various localized corrosion of metals have been further understood by appropriately using these new electrochemical techniques. An array electrode composed of 64 steel wires and potential imaging system were developed as a new electrochemical technique for probing the corrosion potential distribution at the interface of polymeric coating/metals. The measuring technique was described, and the availability of the technique was examined. The novel data related to the corrosion behaviors at interface of coating/metals and the effects of the defects in the coating on its degradation was obtained and discussed. It was demonstrated by the potential imaging that there always exist inhomogeneities in the coatings, including intrinsic defects or damage in service (artificial defects). Corrosion preferentially initiated at the defect sites. The anodic sites surrounding cathodic area of corrosion reaction and its development process had been in situ imaged for the first time for organic coated steel system. The relevant and direct information provided by this unique technique will be very helpful for further understanding some important physicochemical process associated with degradation of coated metals.

A Novel Approach Used to Study the Corrosion Susceptibility of Metallic Materials at a Dynamic Seawater/air Interface

Pitting corrosion of 2A12 aluminum alloy long-scale specimen in simulated seawater splash zone, dynamic waterline zone and full immersion zone

On the localized corrosion of AA5083 in a simulated dynamic seawater/air interface—Part 3: effects of sensitization

Influence of the Dissolved Oxygen Concentration in Artificial Seawater on the Corrosion Behavior of Q235 Mild Steel

Corrosion Behavior of Dissimilar Metal Weld Joint by Underwater

A novel technique to examine the corrosion resistance of FSW dissimilar aluminium alloys under three different corrosion solutions

Corrosion Behavior of the 2024 Aluminum Alloy in the Atmospheric Environment of the South China Sea Islands

A mechanistic study on localized corrosion of sandwich multi-layered aluminium sheet in 3.5 wt.% NaCl solution

Electrochemical Corrosion Behavior of Industrial Pure Aluminum in Simulated Seawater

COMPARATIVE STUDY ON CORROSION BEHAVIOR OF 316 STAINLESS STEEL AND Ti6Al4V ALLOY IN SIMULATED SEAWATER

The Corrosion Behavior of Cu-Ni-Si Alloy in Sea Water with Deep-Sea Bacteria

Numerical Approach for Atmospheric Corrosion Monitoring Based on EIS of a Weathering Steel

Study on Crack Initiation and Propagation of New Corrosion Inhibitor during Stress Corrosion of Aluminum Alloy

Interaction of marine organisms on localized corrosion of 316L stainless steel in Dalian seawater

Study on corrosion behavior and mechanism of AISI 4135 steel in marine environments based on field exposure experiment

Corrosion Inhibitor Screening For Aa6014 Aluminum Alloy Under Different Ambient Conditions Using A Novel Multielectrode Methodology

Novel Electrochemical Techniques with Spatial Resolution and Its Applications in the Investigation of Localized Corrosions

Localized Corrosion Study of Al 2024- T3 Alloy by Scanning Micro Reference Electrode Technique

Direct Observation of Atomic-Scale Origins of Local Dissolution in Al-Cu-Mg Alloys

Impact of Corrosion on the Degradation of the Mechanical Properties of 2195 and 2297 Al Alloys in the Marine Environment

Mechanistic Studies of Atmospheric Corrosion Behavior of Al and Al-based Alloys in a Tropical Marine Environment