Abstract:Aluminum alloys (AAs) have been broadly used in numerous applications due to their exceptional mechanical properties. Although AAs also exhibit outstanding resistance to general corrosion, they suffer from localized corrosion, such as pitting and crevice corrosion, and can therefore lead to unforeseen catastrophic failure. pH-sensitive smart coatings have been considered to be a promising strategy of combating the localized corrosion of AAs due to the unique self-healing capabilities. These smart coatings can sense the local pH decreases and increases induced by the anodic and cathodic reactions of AAs, respectively, thereby releasing corrosion mediating agents to the actively corroding sites on demand. However, the majority of smart coatings developed to date can only sense either acidic or alkaline condition, but not both. In this study, smart coatings that can respond to both acidic and alkaline environments are developed. These dual-pH sensitive smart coatings are based on weak polyelectrolyte coacervates consisting of polyacrylic acid and polyethylenimine or chitosan. When corrosion inhibitors such as SrCrO 4 or Ce(NO 3 ) 3 are dispersed in these coatings and subsequently immersed in aqueous solutions with different pH values, the release rates of corrosion inhibitors are much higher in the acidic and alkaline environments than that of the neutral environment. Deposition of these inhibitor-loaded smart coatings on AA2024-T3 substrates leads to a significant improvement of the corrosion resistance. Furthermore, corrosion inhibitors are also encapsulated into the core-shell particles and nanofibers through the co-axial electrospray and electrospinning techniques, respectively. The shells of the particles and nanofibers are made from the polyelectrolyte coacervates, so they are dual-pH sensitive. These particles and nanofibers are sandwiched in an organic coating matrix and applied on the AA2024-T3 substrates, forming self-healing smart coatings with substantially improved corrosion resistance as evidenced by the electrochemical impedance spectroscopy analysis. In particular, the nanofibers embedded smart coatings can repeatedly heal the intentionally scribed area of the coated AA2024-T3 owing to the transport of corrosion inhibitors from remote areas through the nanochannels created in core-shell nanofibers.

Corrosion Inhibitor Screening For Aa6014 Aluminum Alloy Under Different Ambient Conditions Using A Novel Multielectrode Methodology

Investigation of Long-term Corrosion of AA2024 and AA5119 Aluminum Alloys under chromate coating in Marine Atmosphere by Electrochemical Impedance Technology

Graded Anodic Films for Corrosion Protection of Aerospace Alloys: Anodizing Procedure and Corrosion Behaviour

Dual pH-Sensitive Smart Coatings for Corrosion Inhibition of AA2024-T3

High-Throughput Assessment of Inhibitor Synergies on Aluminum Alloy 2024-T3 through Measurement of Surface Copper Enrichment

Electrochemical Study on Corrosion Damage of 7B04 Aluminum Alloy/Anodic Film/Epoxy Coating System in Simulated Marine Atmospheric Environment

Localized Corrosion and Corrosion Inhibitor of Al-alloy AA6061 Beneath Electrolyte Layers

Synthesis and characterization of phenolphthalein derivatives, detailed theoretical DFT computation/molecular simulation, and prevention of AA2024-T3 corrosion in medium 3.5% NaCl

On the Localised Corrosion of Aa5083-H111 Using a Simulated Dynamic Seawater/Air Interface

Electrochemical Study on Corrosion Damage of 7B04 Aluminum Alloy/Anodic Film/Epoxy Coating System in a Simulated Marine Atmospheric Environment

A Novel Approach Used to Study the Corrosion Susceptibility of Metallic Materials at a Dynamic Seawater/air Interface

The Effect Spray Testing Condition on the Corrosion Performance of Hydrothermally Sealed Anodic Oxide on a 5005 Aluminum Alloy: Comparison between Neutral Salt Spray, Acetic Salt Spray and Prohesion Testing Methods

Corrosion Inhibition of Aluminum Alloy in 50% Ethylene Glycol Solution

The Corrosion Inhibition Effect on Fatigue Behavior for Aluminum Alloy 5052 in the Saline Environment

Corrosion Behavior of Aluminum Alloys in Different Alkaline Environments: Effect of Alloying Elements and Anodization Treatments

On the localized corrosion of AA5083 in a simulated dynamic seawater/air interface-Part 1: Corrosion initiation mechanism

Electrochemical Corrosion Behavior of 2A02 Al Alloy under an Accelerated Simulation Marine Atmospheric Environment

Investigating the corrosion inhibition of aluminium by diamine derivatives in hydrochloric acid: a multi-technique approach

Detailedexperimental and computational explorations of two heterocyclic compounds as corrosion inhibitors for aluminum alloy 2024-T3 in 3.5% NaCl: Electrochemical/surface studies, DFT/MD modeling

Study on Crack Initiation and Propagation of New Corrosion Inhibitor during Stress Corrosion of Aluminum Alloy

Electrochemical Measurements Used for Assessment of Corrosion and Protection of Metallic Materials in the Field: A Critical Review