Abstract:A high cycle fatigue life prediction model based on continuum damage mechanics, crystal plas-ticity and critical distance theory is developed. A novel damage evolution law for anisotropic Ni-based single crystal materials built on continuum damage mechanics is proposed. The crystal plasticity framework was introduced to take into account the particular characteristics of high cycle fatigue. The critical distance theory was innovatively applied to the structure of film cooling holes to predict the lifetime for materials under a multiaxial stress state. High cycle fatigue tests considering drilling technology, stress ratio and creep time were performed using Ni-based single crystal superalloy plates with film cooling holes. The constitutive equations were implemented into a finite element framework to simulate the high cycle fatigue properties of Ni-based single crystal superalloys, and the results of numerical calculations were compared with experimental observations. It was demonstrated that the constitutive formulations proposed in the present study can be used to model the mechanical behavior of Ni-based single crystal superalloys under a multiaxial stress state. The life prediction errors are found to be within the factor-of-three scatter band. The fatigue life of the specimen with ultrafast laser drilled film cooling holes is larger than that with electrostream machined film cooling holes under the same test conditions. The fatigue strength of the specimen with film cooling holes at a stress ratio R = 0.95 is higher than that at a stress ratio R =-1. The life of the specimen with film cooling holes is found to decrease with increasing creep time before high cycle fatigue. The gamma/gamma'-microstructure evolution in the speci-mens with film cooling holes is related to the kinetics of the stress redistribution during the fa-tigue process. A minimum stress level is essential for rafting to occur. The damage distribution for the plate model is in line with the crack initiation location and propagation region of the specimen.

Cyclic Deformation Behavior and Fatigue Life Prediction of an Automotive Cast Aluminum Alloy: A New Method of Determining Intrinsic Fatigue Toughness

Prediction of Fatigue Life for Automotive A-Alloy Wheel with Integrated Cast Defects

Low‐cycle Fatigue Behavior of a Newly Developed Cast Aluminum Alloy for Automotive Applications

Cyclic Deformation Behavior of an Overaged High-Pressure Die-Cast Aluminum Alloy

Continuum Damage Mechanics Based Approach to the Fatigue Life Prediction of Cast Aluminium Alloy with Considering the Effect of Porosity

High Cycle Fatigue Life Prediction Model Based on Crystal Plasticity and Continuum Damage Mechanics for Ni-based Single Crystal Superalloys under a Multiaxial Stress State

Microstructure Analysis and Life Prediction of DD6 Superalloy under 760 °C Combined High and Low Cycle Fatigue Conditions

Heterogeneous Microstructure and Deformation Behavior of an Automotive Grade Aluminum Alloy

Low-cycle fatigue behavior of Silafont®-36 automotive aluminum alloy: Effect of negative strain ratio

Cyclic Deformation Behavior of A Heat-Treated Die-Cast Al-Mg-Si-Based Aluminum Alloy

Low-cycle fatigue behavior of permanent mold cast and die-cast Al-Si-Cu-Mg alloys

High Cycle Fatigue Analysis and Modelling of Cast Al–Si Alloys Extracted from Cylinder Heads Considering Microstructure Characteristics

Fatigue mechanism and life prediction in cast aluminum alloys - A review

Novel Quantification of Porosity Defects on Fatigue Behavior for Cast Aluminum-Silicon Alloys by X-ray Micro-Tomography

An Approach for Predicting the Low-Cycle-Fatigue Crack Initiation Life of Ultrafine-Grained Aluminum Alloy Considering Inhomogeneous Deformation and Microscale Multiaxial Strain

Tensile, Fatigue, and Corrosion Fatigue Behavior of High Performance Die Cast Aluminum Alloy

Deformation Behavior of a Newly-Developed T4-treated Al–Si Die Cast Alloy

An Evaluation on High Cycle Fatigue Fracture Characteristics of 2024-T351 Al Alloy with Different Surface Defects

Probabilistic Method to Predict Fatigue Life Based on Crack Initiating Micro-Mechanism of Aluminum Alloy

3D characterization and modeling of low cycle fatigue damage mechanisms at high temperature in a cast aluminum alloy

Ultra-low Cycle Fatigue Life of Aluminum Alloy and Its Prediction Using Monotonic Tension Test Results